Hi,
on my as255 with RH-linux 6.0 I've installed the svga-server for the
supported CirrusLogic 5664. Unfortunately it won't start, output
appended down below. I tried several settings in the XF86Config, just the
same.
'Cause I dont't have any internal knowledge about the alpha, I don't know
what the reason might be.
Does anybody know?
Thank you (and please apologize for sending the large server output)
V. Zank (Berlin)
>
> ############### output of /proc/pci:
>
> PCI devices found:
> Bus 0, device 6, function 0:
> SCSI storage controller: NCR 53c810 (rev 17).
> Medium devsel. IRQ 11. Master Capable. Latency=32. Min
> Gnt=8.Max Lat=64.
> I/O at 0x8000 [0x8001].
> Non-prefetchable 32 bit memory at 0x4200000 [0x4200000].
> Bus 0, device 7, function 0:
> Non-VGA device: Intel 82378IB (rev 67).
> Medium devsel. Master Capable. No bursts.
> Bus 0, device 13, function 0:
> VGA compatible controller: Cirrus Logic GD 5446 (rev 0).
> Medium devsel. IRQ 10.
> Non-prefetchable 32 bit memory at 0x5000000 [0x5000000].
> Bus 0, device 14, function 0:
> Ethernet controller: DEC DC21040 (rev 36).
> Medium devsel. Fast back-to-back capable. IRQ 15. Master
> Capable. Latency=32.
> I/O at 0x8800 [0x8801].
> Non-prefetchable 32 bit memory at 0x6000000 [0x6000000].
>
> ############### output of X -probeonly:
>
> XFree86 Version 3.3.3.1 / X Window System
> (protocol Version 11, revision 0, vendor release 6300)
> Release Date: January 4 1999
> If the server is older than 6-12 months, or if your card is newer
> than the above date, look for a newer version before reporting
> problems. (see http://www.XFree86.Org/FAQ)
> Operating System: Linux 2.1.131 alpha [ELF]
> Configured drivers:
> SVGA: server for SVGA graphics adaptors (Patchlevel 0):
> mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100,
> s3_virge
> (using VT number 7)
>
> XF86Config: /usr/X11R6/lib/X11/XF86Config
> (**) stands for supplied, (--) stands for probed/default values
> (**) XKB: keycodes: "xfree86"
> (**) XKB: types: "default"
> (**) XKB: compat: "default"
> (**) XKB: symbols: "us(pc101)"
> (**) XKB: geometry: "pc"
> (**) XKB: rules: "xfree86"
> (**) XKB: model: "pc101"
> (**) XKB: layout: "us"
> (**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3
> (**) Mouse: 3 button emulation (timeout: 50ms)
> (**) SVGA: Graphics device ID: "GD 5446"
> (**) SVGA: Monitor ID: "Nokia 445M"
> (--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
> (--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
> (--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
> (--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
> (--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
> (--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
> (--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
> (--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
> (**) FontPath set to "unix/:-1"
> system type: Avanti
> system vari: 0
> cpu model: EV4
> ioperm: turn_on 1 io.base 0
> ioperm: mmap of len 0x200000 returned 0x20000588000
> ioperm: mprotect returned 0
> (--) SVGA: PCI: Cirrus Logic GD5446 rev 0, Memory @ 0x05000000
>
> *** None of the configured devices were detected.***
>
>
This archive was generated by hypermail 2b29 : Fri Jan 07 2000 - 21:00:10 EST