> The LED Display Circuit as described in the OEM design guide shows
> the tests and stops with 1010 0000 which reports 'no cache found'.
> Switching the boot select jumpers to 'Boot service console' doesn't
> help anything. Switching to 'Boot from floppy' doesn't cause the
> floppy to move (I'm not sure if it is connected and jumpered
> correctly).
> I purchased the board with ARC console firmware.
I don't know whether ARC can boot in 8MB of RAM. Actually, I'm pretty
sure it can't. The thing to try would be to dump a MILO image onto a
floppy and then use the "fail-safe loader" to boot that image.
However, even without MILO floppy, the floppy light should go on when
enabling the fail-safe loader.
--david