Cannot increase beyond 38400 baud

Troy Rindy (Troy.Rindy@rindy.com)
Tue, 1 Sep 1998 11:01:34 -0500

I have already tried "/bin/setserial /dev/cua0 irq 4 spd_vhi" and it
doesn't work. It takes the command and sets the flag but when writing
to the serial port, all I get is garbage if I increase the baud rate
beyond 38400 at the comm application.

I have problems with both minicom and the ppp/chat scripts in the
/etc/sysconfig/network-scripts directory. Both work fine if I set speed
at 38400 or slower.

The modem, cable, & scripts work fine on an Intel Platform running
Redhat Linux 4.2.

I have the problems on a Dec Multia 166 running Redhat Linux 5.1

Any suggestions would be greatly appreciated.
Thanks,
Troy Rindy

Troy Rindy Rindy Consulting
Bus: 414-252-4273 125 North Executive Drive
Fax: 414-252-4274 Suite 380
ICQ: 7964294 Brookfield, Wisconsin 53005
Troy.Rindy@rindy.com <mailto:Troy.Rindy@rindy.com>
http://www.rindy.com <http://www.rindy.com>

When I die, spread my ashes over Bill Gates so he can clean up after me
for once.