SMC card lockup

• Next message: Martin Mares: "Re: PCI pci_{un}register_driver interface"
• Previous message: Andre Hedrick: "Re: Data corruption reading IDE CD-ROM in 2.2.x"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi,

We have an SMP box running 2.2.13pre14 with an SMC network card:

  Bus 0, device 9, function 0:
    Ethernet controller: SMC 9432 TX (rev 8).
      Fast devsel. Fast back-to-back capable. IRQ 16. Master Capable. Latency=64. Min Gnt=8.Max Lat=28.
      I/O at 0xe800 [0xe801].
      Non-prefetchable 32 bit memory at 0xeb000000 [0xeb000000].

As I see the driver (epic100) has not been touched since 2.2.13pre13, Tx
status 0001 means Tx completed normally.

Jan 9 22:39:28 plaza kernel: eth0: Transmit timeout using MII device, Tx status 0001.
Jan 9 22:40:03 plaza kernel: eth0: Transmit timeout using MII device, Tx status 0001.
Jan 9 22:50:03 plaza kernel: eth0: Transmit timeout using MII device, Tx status 0001.
Jan 9 23:00:03 plaza kernel: eth0: Transmit timeout using MII device, Tx status 0001.
Jan 9 23:10:03 plaza kernel: eth0: Transmit timeout using MII device, Tx status 0001.
Jan 9 23:17:54 plaza kernel: eth0: Transmit timeout using MII device, Tx status 0001.
Jan 9 23:17:59 plaza kernel: eth0: Transmit timeout using MII device, Tx status 0001.

I'm now trying to upgrade to the latest driver downloaded from Becker's
site. Any other idea?

thanks

-- 
Bazsi
PGP info: KeyID 9AF8D0A9 Fingerprint CD27 CFB0 802C 0944 9CFD 804E C82C 8EB1
     url: http://www.balabit.hu/pgpkey.txt
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

• Next message: Martin Mares: "Re: PCI pci_{un}register_driver interface"
• Previous message: Andre Hedrick: "Re: Data corruption reading IDE CD-ROM in 2.2.x"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Sat Jan 15 2000 - 21:00:16 EST