Try 2.3.40-4 and build both ide-cd, ide-scsi, and scd
pass hdc=scsi
This will redirect the one device to ide-scsi and can be call at the lilo
prompt.......
On Fri, 14 Jan 2000, [iso-8859-1] Jimmy Mäkelä wrote:
> When I try to mount a cd in my HP CD-Writer+ 7200 using ide-scsi i get
> the following messages in my syslog with one disc:
>
> Jan 14 00:08:57 svampskogen kernel: VFS: Disk change detected on device sr(11,0)
> Jan 14 00:08:57 svampskogen kernel: cdrom: can't write to this disc
> Jan 14 00:09:00 svampskogen kernel: ide-scsi: The scsi wants to send us more data than expected - discarding data
> Jan 14 00:09:01 svampskogen last message repeated 83 times
> Jan 14 00:09:01 svampskogen kernel: Unable to identify CD-ROM format.
>
> With another I get this:
>
> Jan 14 00:16:21 svampskogen kernel: VFS: Disk change detected on device ide1(22,0)
> Jan 14 00:16:21 svampskogen kernel: ide-scsi: hdc: unsupported command in request queue (0)
> Jan 14 00:16:21 svampskogen kernel: end_request: I/O error, dev 16:00 (hdc), sector 64
> Jan 14 00:16:21 svampskogen kernel: isofs_read_super: bread failed, dev=16:00, iso_blknum=16, block=32
>
> The first disc is somewhat problematic, and it usually only works in the
> HP. But the second has always worked before, and works fine with my cdrom
> which I use ide-cdrom with.
>
> Jimmy - jmy@flashback.net
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.rutgers.edu
> Please read the FAQ at http://www.tux.org/lkml/
>
Andre Hedrick
The Linux IDE guy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Jan 15 2000 - 21:00:26 EST