> I have an ABit bx6 Rev 2 and it has shared 2 interrupts :-( (You have to)
> one is shared with USB and the other is shared with the AGP Card
> ARGH
hmmm, I have a P-II based NEC desktop box at work (sorry, don't know the
mobo...) whos mobo has inbuilt sound, nic and graphics systems. The graphics
controller is disabled for a PCI based G200, but the nic & audio systems are
still enabled, and used. When I boot the system, the bios system component
summary screen reports that all three (graphics is labelled multimedia...)
are running on irq 11. I'm not overly familiar with the way these irs are
handled in such intel systems, but I'd assume that the bios would prefer tha
they be different. I suppose that given that each device is actually on the
same board, then sharing of irqs is possible, but.....????
Just recently installed Redhat 6.1 on that box. After configuring the nic
for bootp/dhcp ip address discovery, the kernel (??) would report that
erroneous "signal 11"s were detected, & that an immidiate showtdown would be
done. Didn't seem to be any options in bios setup for forcing irqs per card
or subsystem. Eventually doing manual config of ip settings solved the
problem, although I fail to see how an ethernet driver doing bootp/dhcp
broadcasts is any different to any other type of nic usage, when it comes to
usage of irqs.
As win95 has been happily running on that box for ages, I'd say its either
that Linux isn't coping properly with the bizarre (??) irq arrangement, or
that win95 is making better use of the pnp facilities of the system (which
ar enabled in the bios).
Funnily enough, I also saw this same "signal 11" error when installing RH6.1
on a system with an Abit IT5H mobo, except that this one reported the
problem right at the end of the file-copy process. The first time that the
problem disappeared was when I turned of a scsi cdr drive before booting for
the install... hmmm..... The bios of that box reports no such irq conflicts
on boot.
sTu.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Jan 31 2000 - 21:00:16 EST