On Thu, 10 Feb 2000, Leon Breedt wrote:
I resolved similar problem by disabling bus auto-termination from bios.
<snip>
> Hi. I can't seem to get the 2940UW Pro going with 2.2 kernel versions > 2.2.12.
> Aic7xxx drivers > 5.1.19 dont seem to work. Also, no go with 2.3.x, as it
> seems to be using the same driver version as 2.2.14.
> Trying the 5.1.25 aic7xxx driver didn't help either.
>
> Increasing driver verbosity to maximum, shows that it gets stuck in a loop
> of aic7xxx_reset_device(), as it repeatedly prints the message
> "Cleaning up status information and delayed_scbs".
>
> Hardware:
>
> Adaptec 2940UW Pro (BIOS rev 2.11.0)
> Fujitsu MAB3091SP 8.7GB Ultrawide 7000rpm drive
> Gigabyte GA-BX2000 motherboard
>
</snip>
--> Jarno Lähteenmäki (11.02.2000)
--> Telecenter Oy / Espoo
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Feb 15 2000 - 21:00:19 EST