Re: [patch-2.3.46-p2] P6 microcode update support

From: Rogier Wolff (R.E.Wolff@bitwizard.nl)
Date: Wed Feb 16 2000 - 05:17:17 EST


Rogier Wolff wrote:
> Tigran Aivazian wrote:
> > One could go and tweak that data after the update. But even if not
> > (export restrictions (kernel->modules), it is still better to have a
> > bugfree CPU reported as buggy than to have a buggy CPU reported as such?
>
> I think that the best way to report this is something like:
>
> stepping : 14 (5)
>
> meaning that the stepping is now 14, but the hardware is level 5.

.... On the other hand, you don't know what is "below" the 5, as the
BIOS may have upgraded a stepping 3 CPU to a stepping 5. Short of
intercepting the CPU right after reset there is nothing you can do to
determine the hardware level, right?

                                Roger.

-- 
** R.E.Wolff@BitWizard.nl ** http://www.BitWizard.nl/ ** +31-15-2137555 **
*-- BitWizard writes Linux device drivers for any device you may have! --*
*       Common sense is the collection of                                *
******  prejudices acquired by age eighteen.   -- Albert Einstein ********

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Wed Feb 23 2000 - 21:00:14 EST