Re: PCMCIA still doesn't work for 2.3.46-pre2

From: Daniel.Egger@suse.de
Date: Wed Feb 16 2000 - 17:59:34 EST


On 17 Feb, Richard Gooch wrote:

> Well, at the moment I'm using my other network card with 2.3.46-pre2
> and it's working:
 
> Linux PCMCIA Card Services 3.1.11
> options: [pci] [cardbus] [apm]
> Adding cardbus controller 0: PCI device 104c:ac15
> PCI: Enabling device 00:04.0 (0000 -> 0002)
> Yenta IRQ list 0e98, PCI irq0
> Socket status: 30000010
> Adding cardbus controller 1: PCI device 104c:ac15
> PCI: Enabling device 00:04.1 (0000 -> 0002)
> Yenta IRQ list 0e88, PCI irq0
> Socket status: 30000006
> [...]
> cs: IO port probe 0x038c-0x03ff: excluding 0x3c4-0x3e3 0x3ec-0x403
> cs: IO port probe 0x0230-0x0387: excluding 0x378-0x37f
> cs: IO port probe 0x0100-0x021f: clean.
> cs: memory probe 0xa0000000-0xa0ffffff: clean.
> eth0: NE2000 Compatible: io 0x300, irq 3, hw_addr 00:40:33:9A:22:26
 
> The difference seems to be that this card is 16 bit, whereas the other
> card is (it had better be!) 32 bit.

 How do I find out whether my card is a 16 or 32 bit one?
 I believe it should be an 32 bit one because it's an 100/10 Mbit
 NIC (Xircom Realport 100/10/56k (REM56G)) but it's dogslow like an
 16 bit one (max. 1 MB/s per ftp).

Feb 16 22:29:08 schleppi kernel: Linux PCMCIA Card Services 3.1.11
Feb 16 22:29:08 schleppi kernel: kernel build: 2.3.46 #18 Wed Feb 16 18:40:58
/mnt/usr/local/etc/localtime 2000
Feb 16 22:29:08 schleppi kernel: options: [pci] [cardbus] [apm]
Feb 16 22:29:08 schleppi kernel: Adding cardbus controller 0: Texas Instruments
PCI1225
Feb 16 22:29:08 schleppi kernel: Yenta IRQ list 8688, PCI irq11
Feb 16 22:29:08 schleppi kernel: Socket status: 30000010
Feb 16 22:29:08 schleppi kernel: Adding cardbus controller 1: Texas Instruments
PCI1225 (#2)
Feb 16 22:29:08 schleppi kernel: Yenta IRQ list 8680, PCI irq11
Feb 16 22:29:08 schleppi kernel: Socket status: 30000006
Feb 16 22:29:09 schleppi kernel: cs: IO port probe 0x0c00-0x0cff: excluding 0xcf
8-0xcff
Feb 16 22:29:09 schleppi kernel: cs: IO port probe 0x0800-0x08ff: clean.
Feb 16 22:29:09 schleppi kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x10
0-0x107 0x220-0x22f 0x250-0x257 0x330-0x337 0x388-0x38f 0x3c0-0x3df 0x4d0-0x4d7
Feb 16 22:29:09 schleppi kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Feb 16 22:29:09 schleppi kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean.
Feb 16 22:29:09 schleppi kernel: xirc2ps_cs.c 1.31 1998/12/09 19:32:55 (dd9jn+kv
h)

Feb 16 22:29:08 schleppi cardmgr[46]: starting, version is 3.1.9
Feb 16 22:29:09 schleppi cardmgr[46]: watching 2 sockets
Feb 16 22:29:09 schleppi cardmgr[46]: Card Services release does not match!
Feb 16 22:29:09 schleppi cardmgr[46]: initializing socket 0
Feb 16 22:29:09 schleppi cardmgr[46]: socket 0: Xircom CEM56 Ethernet/Modem
Feb 16 22:29:09 schleppi cardmgr[46]: executing: 'insmod /lib/modules/2.3.46/pcm
cia/xirc2ps_cs.o'
Feb 16 22:29:09 schleppi cardmgr[46]: executing: 'insmod /lib/modules/2.3.46/pcm
cia/serial_cs.o'

Feb 16 22:29:11 schleppi kernel: eth0: MII link partner: 01e1
Feb 16 22:29:11 schleppi kernel: eth0: MII selected
Feb 16 22:29:11 schleppi kernel: eth0: media 100BaseT, silicon revision 5
Feb 16 22:29:11 schleppi kernel: eth0: Xircom: port 0x300, irq 3, hwaddr 00:10:A
4:E6:D7:EC
Feb 16 22:29:11 schleppi kernel: ttyS03 at port 0x02e8 (irq = 3) is a 16550A

-- 

Servus, Daniel

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Wed Feb 23 2000 - 21:00:16 EST