bttv problem

From: Daniel Podlejski (underley@underley.eu.org)
Date: Wed Feb 16 2000 - 18:16:54 EST

Next message: Kevin Layer: "Re: #! and argv[0]: the path is removed before invoking the interpreter"
Previous message: Michael Mess: "Problems reading one DVD (other DVDs work)"
Next in thread: Gerd Knorr: "Re: bttv problem"
Reply: Gerd Knorr: "Re: bttv problem"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

I have problem with my videocard under kernel newere than
2.3.35, (tested on 2.3.37, .40, .42, ,.43 and .45) there is dmesg:

Linux video capture interface: v1.00
i2c-core.o: i2c core module
i2c-algo-bit.o: i2c bit algorithm module
bttv: driver version 0.7.13 loaded
bttv0: Brooktree Bt878 (rev 2) bus: 0, devfn: 72, irq: 10, memory: 0xe4001000.
PCI: Enabling bus mastering for device 00:09.0
bttv: 1 Bt8xx card(s) found.
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: PLL: 28636363 => 35468950 ... ok
bttv0: i2c: checking for eeprom @ 0xa0... found
bttv0: dump eeprom @ 0xa0
  00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  f0: ff ff ff ff ff ff ff ff ff ff ff ff 30 02 14 4f
  id: Magic TView (0x3002), vendor: Askey (0x144f)
  => card=24 (Askey/Typhoon/Anubis Magic TView CPH051/061 (bt878))
bttv0: model: BT878(Askey/Typhoon/Anubis Magic TView CPH051/061 (bt878))
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA8425 @ 0x82... not found
bttv0: i2c: checking for TDA9840 @ 0x84... not found
bttv0: i2c: checking for TDA985x @ 0xb6... not found
i2c-core.o: driver i2c TV tuner driver registered.
tuner: chip found @ 0x60
bttv0: i2c attach [Philips PAL]
i2c-core.o: client [Philips PAL] registered to adapter [bt848 #0](pos. 0).
Unable to handle kernel paging request at virtual address 5d726576
printing eip:
5d726576
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<5d726576>]
EFLAGS: 00010202
eax: 5d726576 ebx: c4849820 ecx: c1524000 edx: 00000000
esi: 00000000 edi: c48367a0 ebp: c17c97e0 esp: c1525f48
ds: 0018 es: 0018 ss: 0018
Process v4l-conf (pid: 2122, stackpage=c1525000)
Stack: c4836185 c4849820 00000000 00000000 c17e9ba0 c17c8a40 72616863 6a616d2d
       382d726f 00302d31 c01f3580 c012968b c17c8a40 c17e9ba0 c17e9ba0 00000000
       c17c8a40 c01287f8 c17c8a40 c17e9ba0 00000004 c3cc4000 bffffbdc bffffb8c
Call Trace: [<c4836185>] [<c4849820>] [<c012968b>] [<c01287f8>] [<c01289de>] [<c0109460>]
Code: Bad EIP value.

I have same problem, when I substitute card parameters from kernel
2.3.35.

I use xawtv-3.07

-- Daniel Podlejski <underley@underley.eu.org> ... I am immortal, I have inside me blood of kings, I have no rival, No man can bemy equal ...

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/

Next message: Kevin Layer: "Re: #! and argv[0]: the path is removed before invoking the interpreter"
Previous message: Michael Mess: "Problems reading one DVD (other DVDs work)"
Next in thread: Gerd Knorr: "Re: bttv problem"
Reply: Gerd Knorr: "Re: bttv problem"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Wed Feb 23 2000 - 21:00:16 EST