Re: [2.3.47] de4x5 module not working

From: Daniel.Egger@suse.de
Date: Mon Feb 21 2000 - 12:45:03 EST

Next message: jamal: "Re: What is the status of ICMP, IPv4, TCP, UDP in 2.3.x?"
Previous message: Greg KH: "Re: Accessing serial ports from a loadable module (from kernel space)"
In reply to: buddy@dookie.net: "[2.3.47] de4x5 module not working"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

> I have a DLink DFE-500TX PCI network card which uses the de4x5
> driver. It works w/ both the de4x5 driver and the tulip driver.
> However, as of 2.3.47, the de4x5 driver no longer works.

Experiencing the same problem the other way round.
   Bus 0, device 11, function 0:
    Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 65).
      IRQ 12.
      Master Capable. Latency=96. Min Gnt=20.Max Lat=40.
      I/O at 0xe000 [0xe07f].
      Non-prefetchable 32 bit memory at 0xed001000 [0xed0013ff].

This one works fine with de4x5 but not with tulip although it's
supported and detected fine I don't get any packets through.

Did cost me quite a lot of time to discover this. My first thoughts
were anything but a driver getting no bytes through :/

Servus, Daniel

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/

Next message: jamal: "Re: What is the status of ICMP, IPv4, TCP, UDP in 2.3.x?"
Previous message: Greg KH: "Re: Accessing serial ports from a loadable module (from kernel space)"
In reply to: buddy@dookie.net: "[2.3.47] de4x5 module not working"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Wed Feb 23 2000 - 21:00:28 EST