VIA chipsets are not supported in the kernel for ATA-66...
It was only two days ago I got any info out of VIA.
On Fri, 3 Mar 2000, Marco Meloni wrote:
>
> I just compiled kernel 2.3.49 but things are going in the same way.
> This is the output of the hdparm -d 1 /dev/hda command:
>
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hda: DMA disabled
> ide0: reset: success
>
> obviously, I compiled with the experimental support for via chipset
> and the cable is the right one needed for ata/66.
>
> thanks in advance,
> marco
>
> -------
> A volte mi piacerebbe tornare indietro / la' dove e' rimasta la vita
> correre coi pattini sulle rive dell'oceano / giocare con lei finche'
> non sara' finita
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.rutgers.edu
> Please read the FAQ at http://www.tux.org/lkml/
>
Andre Hedrick
The Linux ATA/IDE guy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Mar 07 2000 - 21:00:16 EST