> > FYI, this anomaly occurs with the linksys cardbus pcmcia network cards as
> > well, it loads the pcmcia tulip driver. removal of the card does not return
> > the keyboard/mouse.
>
> You know, I finally have a clue again.
>
> The Yenta issue is a complete red herring, and it just so happens that
> another change happened to pc_keyb.c at around the same time as the new
> cardbus stuff. And I suspect it is a problem only with certain super-IO
> chips, and those chips probably tend to be used mostly in laptops, which
> is why there seemed to be sucha strong correlation..
>
> Very simple test: in drivers/char/pc_keyb.c, at around line 446, there's a
> line line
>
> /* Ignore error bytes */
> if (!(status & (KBD_STAT_GTO | KBD_STAT_PERR))) {
> ...
>
> and people who have the "keyboard and mouse goes away" problem should just
> remove that single if-statement completely.
>
> Does that really simply change make your keyboard come to life again?
You mean the entire block, right? I'm not sure about blu3's problem, but
mine is only triggered if:
1) the cdrom is in the machine at boot
2) Yenta is compiled in (or just wait, it'll hit yenta_init and others I
assume later and do the same thing)
3) A mouse event occures and /dev/psaux is opened.
My keyboard is returned (with keys pending) when /dev/psaux is closed. As
he stated, removing the card doesn't return mouse/kb. In my case, it
doesn't matter if there's a card installed or not.
I'll try booting with init=/bin/sh (cdrom installed) and run gpm to see if
the same thing happens.
-- Lab tests show that use of micro$oft causes cancer in lab animals- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Mar 15 2000 - 21:00:20 EST