Here is a patch to add parallel port support for the Timedia 1889 PCI
parallel/serial card. It might be called 'EXSYS something' on the box.
Please test it out if you have one of these cards.
Thanks,
Tim.
*/
PS. If you have a PCI parallel port card that isn't supported yet, let me
know so that I can add support.
Index: linux/drivers/parport/ChangeLog
diff -u linux/drivers/parport/ChangeLog:1.1.1.7 linux/drivers/parport/ChangeLog:1.12
--- linux/drivers/parport/ChangeLog:1.1.1.7 Wed Mar 29 09:55:41 2000
+++ linux/drivers/parport/ChangeLog Wed Mar 29 10:09:31 2000
@@ -1,3 +1,7 @@
+2000-03-29 Tim Waugh <twaugh@redhat.com>
+
+ * parport_pc.c: Add support for another PCI card.
+
2000-03-27 Tim Waugh <twaugh@redhat.com>
* parport_pc.c (parport_pc_ecp_read_block_pio): Correct operation
Index: linux/drivers/parport/parport_pc.c
diff -u linux/drivers/parport/parport_pc.c:1.1.1.28 linux/drivers/parport/parport_pc.c:1.49
--- linux/drivers/parport/parport_pc.c:1.1.1.28 Wed Mar 29 09:55:40 2000
+++ linux/drivers/parport/parport_pc.c Wed Mar 29 12:23:57 2000
@@ -2254,6 +2254,7 @@
boca_ioppar,
plx_9050,
afavlab_tk9902,
+ timedia_1889,
};
@@ -2291,6 +2292,7 @@
/* boca_ioppar */ { 1, { { 0, -1 }, } },
/* plx_9050 */ { 2, { { 4, -1 }, { 5, -1 }, } },
/* afavlab_tk9902 */ { 1, { { 0, 1 }, } },
+ /* timedia_1889 */ { 1, { { 2, -1 }, } },
};
static struct pci_device_id parport_pc_pci_tbl[] __devinitdata = {
@@ -2348,6 +2350,8 @@
PCI_SUBVENDOR_ID_EXSYS, PCI_SUBDEVICE_ID_EXSYS_4014, 0,0, plx_9050 },
{ PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_TK9902,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, afavlab_tk9902 },
+ { PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, timedia_1889 },
{ 0, }, /* terminate list */
};
MODULE_DEVICE_TABLE(pci,parport_pc_pci_tbl);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Mar 31 2000 - 21:00:25 EST