DVD-RAM doesn't show up as CD-ROM

From: Jeff DeFouw (defouwj@purdue.edu)
Date: Mon Apr 17 2000 - 01:37:14 EST


At some point in recent 2.3.x my SCSI DVD-RAM (Panasonic LF-D100) stopped
doubling as a CD-ROM. The last known kernel to enable the CD-ROM function
was 2.3.48. I am using 2.3.99-pre5 now.

Host: scsi0 Channel: 00 Id: 05 Lun: 00
  Vendor: MATSHITA Model: PD-2 LF-D100 Rev: A113
  Type: Optical Device ANSI SCSI revision: 02

/dev/scd0 is my SCSI CD-R.
/dev/scd1 used to be my DVD-RAM's CD-ROM capability.

(scsi0) <Adaptec AIC-7890/1 Ultra2 SCSI host adapter> found at PCI 0/6/0
(scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
(scsi0) Downloading sequencer code... 392 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.0/3.2.4
       <Adaptec AIC-7890/1 Ultra2 SCSI host adapter>
scsi : 1 host.
(scsi0:0:4:0) Synchronous at 10.0 Mbyte/sec, offset 8.
  Vendor: PLEXTOR Model: CD-R PX-R820T Rev: 1.03
  Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 4, lun 0
(scsi0:0:5:0) Synchronous at 10.0 Mbyte/sec, offset 32.
  Vendor: MATSHITA Model: PD-2 LF-D100 Rev: A113
  Type: Optical Device ANSI SCSI revision: 02
Detected scsi removable disk sda at scsi0, channel 0, id 5, lun 0
scsi : detected 1 SCSI cdrom 1 SCSI disk total.
sr0: scsi3-mmc drive: 20x/20x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.07

--
Jeff DeFouw <defouwj@purdue.edu>

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sun Apr 23 2000 - 21:00:10 EST