Couple of lockups on boot with 8way xeons (no bigmem at the moment)
2.3.99pre6-3 with Manfreds /proc race patch. Attached are the oopses
and the boot messages which include an MP table warning which may be
related to the magic 14 minute lockups.
---BEGIN---
No modules in ksyms, skipping objects
Unable to handle kernel NULL pointer dereference at virtual address 00000024
c01dca2d
*pde = 00000000
Oops: 0002
CPU: 0
EIP: 0010:[<c01dca2d>]
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010292
eax: 00000000 ebx: c0295440 ecx: c20b78e0 edx: c20b78e4
esi: c0295474 edi: c20b38d4 ebp: 00000003 esp: f7ff1ed0
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 1, stackpage=f7ff1000)
Stack: c01d8b24 c0269ee0 c0367180 c0367248 c20b3900 c20b38d4 00000080 00000000
c20b3800 c02589bd c0367180 00006f68 00000001 c20b38d4 00701a00 00000000
0007122a 032d6377 ff00801b 801b8000 00000000 c0364d00 002a005a 00000000
Call Trace: [<c01d8b24>] [<c0269ee0>] [<c02589bd>] [<ff00801b>] [<c01acb5e>] [<
[<c01ad804>] [<c01070f4>] [<c01086b0>]
Code: c7 40 24 00 00 00 00 a1 14 8c 29 c0 a3 48 8e 36 c0 a1 18 8c
>>EIP; c01dca2d <cdrom_sysctl_register+25/6c> <=====
Trace; c01d8b24 <register_cdrom+74/204>
Trace; c0269ee0 <vendor+598a/b76f>
Trace; c02589bd <sense_data_texts+2165/2676>
Trace; ff00801b <END_OF_CODE+3ec96d17/????>
Trace; c01acb5e <ide_cdrom_register+11e/128>
Trace; c01ad804 <ide_cdrom_init+110/1bc>
Trace; c01070f4 <init+60/1dc>
Trace; c01086b0 <kernel_thread+28/38>
Code; c01dca2d <cdrom_sysctl_register+25/6c>
00000000 <_EIP>:
Code; c01dca2d <cdrom_sysctl_register+25/6c> <=====
0: c7 40 24 00 00 00 00 movl $0x0,0x24(%eax) <=====
Code; c01dca34 <cdrom_sysctl_register+2c/6c>
7: a1 14 8c 29 c0 mov 0xc0298c14,%eax
Code; c01dca39 <cdrom_sysctl_register+31/6c>
c: a3 48 8e 36 c0 mov %eax,0xc0368e48
Code; c01dca3e <cdrom_sysctl_register+36/6c>
11: a1 18 8c 00 00 mov 0x8c18,%eax
CPU: 0
EIP: 0010:[<c01205a2>]
EFLAGS: 00000086
eax: f7fe2000 ebx: f7fe0000 ecx: c029e0a8 edx: c029e098
esi: 00000001 edi: f7ff0000 ebp: c029e000 esp: f7ff1da0
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 1, stackpage=f7ff1000)
Stack: f7ff04fc f7ff04dc 00000282 f7ff0000 c027f8e8 c0120ac3 00000002 00000000
00000024 00000003 00000031 f7ff04dc 00000010 c010ba01 0000000b f7ff1e9c
c011586c c023205e f7ff1e9c 00000002 f7ff0000 c0295474 c20b38d4 00000003
Call Trace: [<c0120ac3>] [<c010ba01>] [<c011586c>] [<c023205e>] [<c01245c7>] [<
[<c022c41d>] [<c010b5d9>] [<c01dca2d>] [<c01d8b24>] [<c0269ee0>] [<c0258
[<c02589bd>] [<c01ad4b6>] [<c01ad804>] [<c01070f4>] [<c01086b0>]
Code: 8b 43 7c c7 83 88 00 00 00 00 00 00 00 80 63 04 cf 89 83 80
>>EIP; c01205a2 <exit_notify+20e/384> <=====
Trace; c0120ac3 <do_exit+3ab/438>
Trace; c010ba01 <die+d5/d8>
Trace; c011586c <do_page_fault+3ac/4b0>
Trace; c023205e <call_spurious_interrupt+5c01/8f17>
Trace; c01245c7 <update_wall_time+b/3c>
Trace; c022c41d <call_apic_timer_interrupt+5/10>
Trace; c010b5d9 <error_code+2d/38>
Trace; c01dca2d <cdrom_sysctl_register+25/6c>
Trace; c01d8b24 <register_cdrom+74/204>
Trace; c0269ee0 <vendor+598a/b76f>
Trace; c02589bd <sense_data_texts+2165/2676>
Trace; c01ad4b6 <ide_cdrom_setup+462/4a0>
Trace; c01ad804 <ide_cdrom_init+110/1bc>
Trace; c01070f4 <init+60/1dc>
Trace; c01086b0 <kernel_thread+28/38>
Code; c01205a2 <exit_notify+20e/384>
00000000 <_EIP>:
Code; c01205a2 <exit_notify+20e/384> <=====
0: 8b 43 7c mov 0x7c(%ebx),%eax <=====
Code; c01205a5 <exit_notify+211/384>
3: c7 83 88 00 00 00 00 movl $0x0,0x88(%ebx)
Code; c01205ac <exit_notify+218/384>
a: 00 00 00
Code; c01205af <exit_notify+21b/384>
d: 80 63 04 cf andb $0xcf,0x4(%ebx)
Code; c01205b3 <exit_notify+21f/384>
11: 89 83 80 00 00 00 mov %eax,0x80(%ebx)
----END----
----BEGIN----
No modules in ksyms, skipping objects
Process swapper (pid: 1, stackpage=f7ff1000)
Stack: c01d8b24 c0269ee0 c0367180 c0367248 c20b3900 c20b38d4 00000080 00000000
c20b3800 c02589bd c0367180 00006f68 00000001 c20b38d4 00701a00 00000000
0007122a 032d6377 ff00801b 801b8000 00000000 c0364d00 002a005a 00000000
Call Trace: [<c01d8b24>] [<c0269ee0>] [<c02589bd>] [<ff00801b>] [<c01acb5e>] [<
[<c01ad804>] [<c01070f4>] [<c01086b0>]
Code: c7 40 24 00 00 00 00 a1 14 8c 29 c0 a3 48 8e 36 c0 a1 18 8c
Using defaults from ksymoops -t elf32-i386 -a i386
Trace; c01d8b24 <register_cdrom+74/204>
Trace; c0269ee0 <vendor+598a/b76f>
Trace; c02589bd <sense_data_texts+2165/2676>
Trace; ff00801b <END_OF_CODE+3ec96d17/????>
Trace; c01acb5e <ide_cdrom_register+11e/128>
Trace; c01ad804 <ide_cdrom_init+110/1bc>
Trace; c01070f4 <init+60/1dc>
Trace; c01086b0 <kernel_thread+28/38>
Code; 00000000 Before first symbol
00000000 <_EIP>:
Code; 00000000 Before first symbol
0: c7 40 24 00 00 00 00 movl $0x0,0x24(%eax)
Code; 00000007 Before first symbol
7: a1 14 8c 29 c0 mov 0xc0298c14,%eax
Code; 0000000c Before first symbol
c: a3 48 8e 36 c0 mov %eax,0xc0368e48
Code; 00000011 Before first symbol
11: a1 18 8c 00 00 mov 0x8c18,%eax
CPU: 4
EIP: 0010:[<c01205cf>]
EFLAGS: 00000086
eax: f7fe2000 ebx: f7fe0000 ecx: c029e0a8 edx: c029e098
esi: 00000001 edi: f7ff0000 ebp: c029e000 esp: f7ff1da0
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 1, stackpage=f7ff1000)
Stack: f7ff04fc f7ff04dc 00000282 f7ff0000 c027f8e8 c0120ac3 00000002 00000000
00000024 00000003 00000031 f7ff04dc 00000010 c010ba01 0000000b f7ff1e9c
c011586c c023205e f7ff1e9c 00000002 f7ff0000 c0295474 c20b38d4 00000003
Call Trace: [<c0120ac3>] [<c010ba01>] [<c011586c>] [<c023205e>] [<c012484c>] [<
[<c022c41d>] [<c010b5d9>] [<c01dca2d>] [<c01d8b24>] [<c0269ee0>] [<c0258
[<c02589bd>] [<c01ad4b6>] [<c01ad804>] [<c01070f4>] [<c01086b0>]
Code: 8b 83 80 00 00 00 89 98 84 00 00 00 8b 03 83 f8 04 75 0d 8b
>>EIP; c01205cf <exit_notify+23b/384> <=====
Trace; c0120ac3 <do_exit+3ab/438>
Trace; c010ba01 <die+d5/d8>
Trace; c011586c <do_page_fault+3ac/4b0>
Trace; c023205e <call_spurious_interrupt+5c01/8f17>
Trace; c012484c <timer_bh+f0/424>
Trace; c022c41d <call_apic_timer_interrupt+5/10>
Trace; c010b5d9 <error_code+2d/38>
Trace; c01dca2d <cdrom_sysctl_register+25/6c>
Trace; c01d8b24 <register_cdrom+74/204>
Trace; c0269ee0 <vendor+598a/b76f>
Trace; c02589bd <sense_data_texts+2165/2676>
Trace; c01ad4b6 <ide_cdrom_setup+462/4a0>
Trace; c01ad804 <ide_cdrom_init+110/1bc>
Trace; c01070f4 <init+60/1dc>
Trace; c01086b0 <kernel_thread+28/38>
Code; c01205cf <exit_notify+23b/384>
00000000 <_EIP>:
Code; c01205cf <exit_notify+23b/384> <=====
0: 8b 83 80 00 00 00 mov 0x80(%ebx),%eax <=====
Code; c01205d5 <exit_notify+241/384>
6: 89 98 84 00 00 00 mov %ebx,0x84(%eax)
Code; c01205db <exit_notify+247/384>
c: 8b 03 mov (%ebx),%eax
Code; c01205dd <exit_notify+249/384>
e: 83 f8 04 cmp $0x4,%eax
Code; c01205e0 <exit_notify+24c/384>
11: 75 0d jne 20 <_EIP+0x20> c01205ef <exit_notify+25b/384>
Code; c01205e2 <exit_notify+24e/384>
13: 8b 00 mov (%eax),%eax
----END----
----BEGIN----
Linux version 2.3.99-pre6 (root@www03.webtop.com) (gcc version 2.95.1 19990816/Linux (release)) #2 SMP Tue Apr 18 16:25:38 BST 2000
e820: 0009d000 @ 00000000 (usable)
e820: 00003000 @ 0009d000 (reserved)
e820: 00020000 @ 000e0000 (reserved)
e820: efef6500 @ 00100000 (usable)
e820: 00009b00 @ efff6500 (ACPI data)
e820: 00050000 @ fffb0000 (reserved)
e820: 00000000 @ 00000000 (usable)
Warning only 896MB will be used.
Use a PAE enabled kernel.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
Scan SMP from c009e000 for 4096 bytes.
found SMP MP-table at 0009e140
hm, page 0009e000 reserved twice.
hm, page 0009f000 reserved twice.
hm, page 0009e000 reserved twice.
hm, page 0009f000 reserved twice.
WARNING: MP table in the EBDA can be UNSAFE, contact linux-smp@vger.rutgers.edu if you experience SMP problems!
On node 0 totalpages: 229376
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: IBM ENSW Product ID: Comanche SMP APIC at: 0xFEE00000
Processor #7 Pentium(tm) Pro APIC version 17
Floating point unit present.
64 bit compare & exchange supported.
Internal APIC present.
Bootup CPU
Processor #0 Pentium(tm) Pro APIC version 17
Floating point unit present.
64 bit compare & exchange supported.
Internal APIC present.
Processor #1 Pentium(tm) Pro APIC version 17
Floating point unit present.
64 bit compare & exchange supported.
Internal APIC present.
Processor #2 Pentium(tm) Pro APIC version 17
Floating point unit present.
64 bit compare & exchange supported.
Internal APIC present.
Processor #3 Pentium(tm) Pro APIC version 17
Floating point unit present.
64 bit compare & exchange supported.
Internal APIC present.
Processor #4 Pentium(tm) Pro APIC version 17
Floating point unit present.
64 bit compare & exchange supported.
Internal APIC present.
Processor #5 Pentium(tm) Pro APIC version 17
Floating point unit present.
64 bit compare & exchange supported.
Internal APIC present.
Processor #6 Pentium(tm) Pro APIC version 17
Floating point unit present.
64 bit compare & exchange supported.
Internal APIC present.
Bus #0 is PCI
Bus #1 is PCI
Bus #2 is PCI
Bus #3 is PCI
Bus #4 is PCI
Bus #5 is PCI
Bus #6 is PCI
Bus #7 is PCI
Bus #8 is PCI
Bus #9 is PCI
Bus #10 is PCI
Bus #11 is PCI
Bus #12 is PCI
Bus #13 is PCI
Bus #14 is PCI
Bus #15 is PCI
Bus #16 is ISA
I/O APIC #14 Version 19 at 0xFEC00000.
Int: type 0, pol 1, trig 1, bus 16, IRQ 01, APIC ID e, APIC INT 01
Int: type 0, pol 1, trig 1, bus 16, IRQ 00, APIC ID e, APIC INT 02
Int: type 0, pol 1, trig 1, bus 16, IRQ 03, APIC ID e, APIC INT 03
Int: type 0, pol 1, trig 1, bus 16, IRQ 04, APIC ID e, APIC INT 04
Int: type 0, pol 1, trig 1, bus 16, IRQ 06, APIC ID e, APIC INT 06
Int: type 0, pol 1, trig 1, bus 16, IRQ 07, APIC ID e, APIC INT 07
Int: type 0, pol 3, trig 1, bus 16, IRQ 08, APIC ID e, APIC INT 08
Int: type 0, pol 1, trig 1, bus 16, IRQ 09, APIC ID e, APIC INT 09
Int: type 0, pol 1, trig 1, bus 16, IRQ 0c, APIC ID e, APIC INT 0c
Int: type 0, pol 1, trig 1, bus 16, IRQ 0d, APIC ID e, APIC INT 0d
Int: type 0, pol 1, trig 1, bus 16, IRQ 0e, APIC ID e, APIC INT 0e
Int: type 0, pol 3, trig 3, bus 0, IRQ 08, APIC ID e, APIC INT 35
Int: type 0, pol 3, trig 3, bus 0, IRQ 2c, APIC ID e, APIC INT 1a
Int: type 0, pol 3, trig 3, bus 0, IRQ 38, APIC ID e, APIC INT 33
Int: type 0, pol 3, trig 3, bus 0, IRQ 38, APIC ID e, APIC INT 33
Int: type 0, pol 3, trig 3, bus 13, IRQ 1c, APIC ID e, APIC INT 16
Int: type 0, pol 0, trig 0, bus 0, IRQ 3f, APIC ID e, APIC INT 31
Int: type 0, pol 0, trig 0, bus 4, IRQ 04, APIC ID e, APIC INT 10
Int: type 0, pol 0, trig 0, bus 4, IRQ 08, APIC ID e, APIC INT 11
Int: type 0, pol 0, trig 0, bus 4, IRQ 0c, APIC ID e, APIC INT 12
Int: type 0, pol 0, trig 0, bus 4, IRQ 10, APIC ID e, APIC INT 13
Int: type 0, pol 0, trig 0, bus 4, IRQ 14, APIC ID e, APIC INT 14
Int: type 0, pol 0, trig 0, bus 13, IRQ 18, APIC ID e, APIC INT 15
Int: type 0, pol 0, trig 0, bus 10, IRQ 20, APIC ID e, APIC INT 17
Int: type 0, pol 0, trig 0, bus 10, IRQ 24, APIC ID e, APIC INT 18
Int: type 0, pol 0, trig 0, bus 0, IRQ 28, APIC ID e, APIC INT 19
Int: type 0, pol 0, trig 0, bus 0, IRQ 30, APIC ID e, APIC INT 1b
Int: type 0, pol 0, trig 0, bus 4, IRQ 05, APIC ID e, APIC INT 1c
Int: type 0, pol 0, trig 0, bus 4, IRQ 06, APIC ID e, APIC INT 28
Int: type 0, pol 0, trig 0, bus 4, IRQ 07, APIC ID e, APIC INT 2c
Int: type 0, pol 0, trig 0, bus 4, IRQ 09, APIC ID e, APIC INT 1d
Int: type 0, pol 0, trig 0, bus 4, IRQ 0a, APIC ID e, APIC INT 28
Int: type 0, pol 0, trig 0, bus 4, IRQ 0b, APIC ID e, APIC INT 2c
Int: type 0, pol 0, trig 0, bus 4, IRQ 0d, APIC ID e, APIC INT 1e
Int: type 0, pol 0, trig 0, bus 4, IRQ 0e, APIC ID e, APIC INT 28
Int: type 0, pol 0, trig 0, bus 4, IRQ 0f, APIC ID e, APIC INT 2c
Int: type 0, pol 0, trig 0, bus 4, IRQ 11, APIC ID e, APIC INT 1f
Int: type 0, pol 0, trig 0, bus 4, IRQ 12, APIC ID e, APIC INT 29
Int: type 0, pol 0, trig 0, bus 4, IRQ 13, APIC ID e, APIC INT 2d
Int: type 0, pol 0, trig 0, bus 4, IRQ 15, APIC ID e, APIC INT 20
Int: type 0, pol 0, trig 0, bus 4, IRQ 16, APIC ID e, APIC INT 29
Int: type 0, pol 0, trig 0, bus 4, IRQ 17, APIC ID e, APIC INT 2d
Int: type 0, pol 0, trig 0, bus 13, IRQ 19, APIC ID e, APIC INT 21
Int: type 0, pol 0, trig 0, bus 13, IRQ 1a, APIC ID e, APIC INT 29
Int: type 0, pol 0, trig 0, bus 13, IRQ 1b, APIC ID e, APIC INT 2d
Int: type 0, pol 0, trig 0, bus 13, IRQ 1d, APIC ID e, APIC INT 22
Int: type 0, pol 0, trig 0, bus 13, IRQ 1e, APIC ID e, APIC INT 2a
Int: type 0, pol 0, trig 0, bus 13, IRQ 1f, APIC ID e, APIC INT 2e
Int: type 0, pol 0, trig 0, bus 10, IRQ 21, APIC ID e, APIC INT 23
Int: type 0, pol 0, trig 0, bus 10, IRQ 22, APIC ID e, APIC INT 2a
Int: type 0, pol 0, trig 0, bus 10, IRQ 23, APIC ID e, APIC INT 2e
Int: type 0, pol 0, trig 0, bus 10, IRQ 25, APIC ID e, APIC INT 24
Int: type 0, pol 0, trig 0, bus 10, IRQ 26, APIC ID e, APIC INT 2a
Int: type 0, pol 0, trig 0, bus 10, IRQ 27, APIC ID e, APIC INT 2e
Int: type 0, pol 0, trig 0, bus 0, IRQ 29, APIC ID e, APIC INT 25
Int: type 0, pol 0, trig 0, bus 0, IRQ 2a, APIC ID e, APIC INT 2b
Int: type 0, pol 0, trig 0, bus 0, IRQ 2b, APIC ID e, APIC INT 2f
Int: type 0, pol 0, trig 0, bus 0, IRQ 2d, APIC ID e, APIC INT 26
Int: type 0, pol 0, trig 0, bus 0, IRQ 2e, APIC ID e, APIC INT 2b
Int: type 0, pol 0, trig 0, bus 0, IRQ 2f, APIC ID e, APIC INT 2f
Int: type 0, pol 0, trig 0, bus 0, IRQ 31, APIC ID e, APIC INT 27
Int: type 0, pol 0, trig 0, bus 0, IRQ 32, APIC ID e, APIC INT 2b
Int: type 0, pol 0, trig 0, bus 0, IRQ 33, APIC ID e, APIC INT 2f
Lint: type 1, pol 0, trig 0, bus 16, IRQ 00, APIC ID ff, APIC LINT 01
Lint: type 3, pol 0, trig 0, bus 16, IRQ 00, APIC ID ff, APIC LINT 00
Processors: 8
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Initializing CPU#0
Detected 550018766 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1097.73 BogoMIPS
Memory: 897488k/917504k available (1521k kernel code, 19620k reserved, 129k data, 380k init, 0k highmem)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.36 (20000221) Richard Gooch (rgooch@atnf.csiro.au)
CPU0: Intel Pentium III (Katmai) stepping 03
per-CPU timeslice cutoff: 5708.61 usecs.
Getting VERSION: 40011
Getting VERSION: 40011
Getting LVT0: 700
Getting LVT1: 400
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
CPU present map: ff
Booting processor 1/0 eip 2000
Setting warm reset code and vector.
1.
2.
3.
Asserting INIT.
Waiting for send to finish...
+Deasserting INIT.
Waiting for send to finish...
+#startup loops: 2.
Sending STARTUP #1.
After apic_write.
Startup point 1.
Initializing CPU#1
Waiting for send to finish...
CPU#1 (phys ID: 0) waiting for CALLOUT
+Sending STARTUP #2.
After apic_write.
Startup point 1.
Waiting for send to finish...
+After Startup.
Before Callout 1.
After Callout 1.
CALLIN, before setup_local_APIC().
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1097.73 BogoMIPS
Stack at about c20bdfbc
OK.
CPU1: Intel Pentium III (Katmai) stepping 03
CPU has booted.
Booting processor 2/1 eip 2000
Setting warm reset code and vector.
1.
2.
3.
Asserting INIT.
Waiting for send to finish...
+Deasserting INIT.
Waiting for send to finish...
+#startup loops: 2.
Sending STARTUP #1.
After apic_write.
Startup point 1.
Initializing CPU#2
Waiting for send to finish...
CPU#2 (phys ID: 1) waiting for CALLOUT
+Sending STARTUP #2.
After apic_write.
Startup point 1.
Waiting for send to finish...
+After Startup.
Before Callout 2.
After Callout 2.
CALLIN, before setup_local_APIC().
masked ExtINT on CPU#2
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1097.73 BogoMIPS
Stack at about f7ffffbc
OK.
CPU2: Intel Pentium III (Katmai) stepping 03
CPU has booted.
Booting processor 3/2 eip 2000
Setting warm reset code and vector.
1.
2.
3.
Asserting INIT.
Waiting for send to finish...
+Deasserting INIT.
Waiting for send to finish...
+#startup loops: 2.
Sending STARTUP #1.
After apic_write.
Startup point 1.
Initializing CPU#3
Waiting for send to finish...
CPU#3 (phys ID: 2) waiting for CALLOUT
+Sending STARTUP #2.
After apic_write.
Startup point 1.
Waiting for send to finish...
+After Startup.
Before Callout 3.
After Callout 3.
CALLIN, before setup_local_APIC().
masked ExtINT on CPU#3
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1097.73 BogoMIPS
Stack at about f7ffdfbc
OK.
CPU3: Intel Pentium III (Katmai) stepping 03
CPU has booted.
Booting processor 4/3 eip 2000
Setting warm reset code and vector.
1.
2.
3.
Asserting INIT.
Waiting for send to finish...
+Deasserting INIT.
Waiting for send to finish...
+#startup loops: 2.
Sending STARTUP #1.
After apic_write.
Startup point 1.
Initializing CPU#4
Waiting for send to finish...
CPU#4 (phys ID: 3) waiting for CALLOUT
+Sending STARTUP #2.
After apic_write.
Startup point 1.
Waiting for send to finish...
+After Startup.
Before Callout 4.
After Callout 4.
CALLIN, before setup_local_APIC().
masked ExtINT on CPU#4
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1097.73 BogoMIPS
Stack at about f7ffbfbc
OK.
CPU4: Intel Pentium III (Katmai) stepping 03
CPU has booted.
Booting processor 5/4 eip 2000
Setting warm reset code and vector.
1.
2.
3.
Asserting INIT.
Waiting for send to finish...
+Deasserting INIT.
Waiting for send to finish...
+#startup loops: 2.
Sending STARTUP #1.
After apic_write.
Startup point 1.
Initializing CPU#5
Waiting for send to finish...
CPU#5 (phys ID: 4) waiting for CALLOUT
+Sending STARTUP #2.
After apic_write.
Startup point 1.
Waiting for send to finish...
+After Startup.
Before Callout 5.
After Callout 5.
CALLIN, before setup_local_APIC().
masked ExtINT on CPU#5
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1097.73 BogoMIPS
Stack at about f7ff9fbc
OK.
CPU5: Intel Pentium III (Katmai) stepping 03
CPU has booted.
Booting processor 6/5 eip 2000
Setting warm reset code and vector.
1.
2.
3.
Asserting INIT.
Waiting for send to finish...
+Deasserting INIT.
Waiting for send to finish...
+#startup loops: 2.
Sending STARTUP #1.
After apic_write.
Startup point 1.
Initializing CPU#6
Waiting for send to finish...
CPU#6 (phys ID: 5) waiting for CALLOUT
+Sending STARTUP #2.
After apic_write.
Startup point 1.
Waiting for send to finish...
+After Startup.
Before Callout 6.
After Callout 6.
CALLIN, before setup_local_APIC().
masked ExtINT on CPU#6
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1097.73 BogoMIPS
Stack at about f7ff5fbc
OK.
CPU6: Intel Pentium III (Katmai) stepping 03
CPU has booted.
Booting processor 7/6 eip 2000
Setting warm reset code and vector.
1.
2.
3.
Asserting INIT.
Waiting for send to finish...
+Deasserting INIT.
Waiting for send to finish...
+#startup loops: 2.
Sending STARTUP #1.
After apic_write.
Startup point 1.
Initializing CPU#7
Waiting for send to finish...
CPU#7 (phys ID: 6) waiting for CALLOUT
+Sending STARTUP #2.
After apic_write.
Startup point 1.
Waiting for send to finish...
+After Startup.
Before Callout 7.
After Callout 7.
CALLIN, before setup_local_APIC().
masked ExtINT on CPU#7
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1097.73 BogoMIPS
Stack at about f7ff3fbc
OK.
CPU7: Intel Pentium III (Katmai) stepping 03
CPU has booted.
Before bogomips.
Total of 8 processors activated (191.89 BogoMIPS).
Before bogocount - setting activated=1.
Boot done.
ENABLING IO-APIC IRQs
...changing IO-APIC physical APIC ID to 14 ... ok.
Synchronizing Arb IDs.
..TIMER: vector=81 pin1=2 pin2=-1
activating NMI Watchdog ... done.
testing the IO APIC.......................
.................................... done.
calibrating APIC timer ...
..... CPU clock speed is 549.9783 MHz.
..... host bus clock speed is 99.9960 MHz.
cpu: 0, clocks: 999960, slice: 111106
CPU0<C0:999952,C:888832,D:14,S:111106,C:999960>
cpu: 6, clocks: 999960, slice: 111106
cpu: 7, clocks: 999960, slice: 111106
cpu: 5, clocks: 999960, slice: 111106
CPU6<C0:999952,C:222208,D:2,S:111106,C:999960>
CPU7<C0:999952,C:111104,D:0,S:111106,C:999960>
cpu: 1, clocks: 999960, slice: 111106
CPU5<C0:999952,C:333312,D:4,S:111106,C:999960>
cpu: 2, clocks: 999960, slice: 111106
cpu: 3, clocks: 999960, slice: 111106
cpu: 4, clocks: 999960, slice: 111106
CPU1<C0:999952,C:777728,D:12,S:111106,C:999960>
CPU2<C0:999952,C:666624,D:10,S:111106,C:999960>
CPU3<C0:999952,C:555520,D:8,S:111106,C:999960>
CPU4<C0:999952,C:444416,D:6,S:111106,C:999960>
checking TSC synchronization across CPUs:
BIOS BUG: CPU#5 improperly initialized, has 3 usecs TSC skew! FIXED.
Setting commenced=1, go go go
PCI: PCI BIOS revision 2.10 entry at 0xfd26c, last bus=15
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Compaq host bridge: secondary bus 0d
PCI: Compaq host bridge: secondary bus 00
PCI: Compaq host bridge: secondary bus 04
PCI: Compaq host bridge: secondary bus 0a
PCI->APIC IRQ transform: (B0,I2,P0) -> 53
PCI->APIC IRQ transform: (B0,I11,P0) -> 26
PCI->APIC IRQ transform: (B0,I14,P0) -> 51
PCI->APIC IRQ transform: (B0,I14,P0) -> 51
PCI->APIC IRQ transform: (B0,I15,P3) -> 49
PCI->APIC IRQ transform: (B13,I7,P0) -> 22
PCI: Address space collision on region 8 of device Intel Corporation 82371AB PIIX4 ACPI [440:45f]
Linux NET4.0 for Linux 2.3
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 4096 buckets, 64Kbytes
TCP: Hash tables configured (established 32768 bind 43690)
Starting kswapd v1.6
Uniform Multi-Platform E-IDE driver Revision: 6.30
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 79
PIIX4: not 100% native mode: will probe irqs later
hda: CRD-8400B, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 40X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.07
Unable to handle kernel NULL pointer dereference at virtual address 00000024
printing eip:
c01dca2d
*pde = 00000000
Oops: 0002
CPU: 4
EIP: 0010:[<c01dca2d>]
EFLAGS: 00010292
eax: 00000000 ebx: c0295440 ecx: c20b78e0 edx: c20b78e4
esi: c0295474 edi: c20b38d4 ebp: 00000003 esp: f7ff1ed0
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 1, stackpage=f7ff1000)
Stack: c01d8b24 c0269ee0 c0367180 c0367248 c20b3900 c20b38d4 00000080 00000000
c20b3800 c02589bd c0367180 00006f68 00000001 c20b38d4 00701a00 00000000
0007122a 032d6377 ff00801b 801b8000 00000000 c0364d00 002a005a 00000000
Call Trace: [<c01d8b24>] [<c0269ee0>] [<c02589bd>] [<ff00801b>] [<c01acb5e>] [<c02589bd>] [<c01ad4b6>]
[<c01ad804>] [<c01070f4>] [<c01086b0>]
Code: c7 40 24 00 00 00 00 a1 14 8c 29 c0 a3 48 8e 36 c0 a1 18 8c
NMI Watchdog detected LOCKUP on CPU4, registers:
CPU: 4
EIP: 0010:[<c01205cf>]
EFLAGS: 00000086
eax: f7fe2000 ebx: f7fe0000 ecx: c029e0a8 edx: c029e098
esi: 00000001 edi: f7ff0000 ebp: c029e000 esp: f7ff1da0
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 1, stackpage=f7ff1000)
Stack: f7ff04fc f7ff04dc 00000282 f7ff0000 c027f8e8 c0120ac3 00000002 00000000
00000024 00000003 00000031 f7ff04dc 00000010 c010ba01 0000000b f7ff1e9c
c011586c c023205e f7ff1e9c 00000002 f7ff0000 c0295474 c20b38d4 00000003
Call Trace: [<c0120ac3>] [<c010ba01>] [<c011586c>] [<c023205e>] [<c012484c>] [<c012205d>] [<c0114024>]
[<c022c41d>] [<c010b5d9>] [<c01dca2d>] [<c01d8b24>] [<c0269ee0>] [<c02589bd>] [<ff00801b>] [<c01acb5e>]
[<c02589bd>] [<c01ad4b6>] [<c01ad804>] [<c01070f4>] [<c01086b0>]
Code: 8b 83 80 00 00 00 89 98 84 00 00 00 8b 03 83 f8 04 75 0d 8b
console shuts up ...
---END---
-- Chris Good - Dialog Corp. The Westbrook Centre, Milton Rd, Cambridge UK Phone: 01223 715000 Fax: 01223 715001 http://www.dialog.com- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Apr 23 2000 - 21:00:13 EST