Date: Sat, 22 Apr 2000 11:07:37 +0400
From: root <vim@foto.asvt.ru>
Possible bug in drivers/char/serial.c (2.2.14)
Pcmcia serial_cs.o module assigns ttyS0 to pcmcia modem while ttyS0 is
originally internal serial port. The problem was found in
char/devices/serial.c. Version 2.2.12 of serial.c with the rest of
2.2.14 works fine. Difference is in line 1696:
Can you say more about the problem you're trying to track down? pcmcia
serial_cs.o will reassign ttyS0 to the pcmcia modem under the following
circumstances the port assigned by the pcmcia subsystems matches the
default ttyS0 port, OR (2) ttyS0 is currently not be configured.
2.2.12:
uart_config[state->type].dfl_xmit_fifo_size;
2.2.14:
uart_config[new_serial.type].dfl_xmit_fifo_size;
This change has nothing to do with how devices are assigned, as needed
to solve a bug when using setserial to set the UART type.
- Ted
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Apr 23 2000 - 21:00:21 EST