I just compiled 2.3.99-pre6-6 and got this after I rebooted..
eth0: first avaialble mdeia type: 10baseT
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e000.
Flags; bus-master 1, full 1; dirty 0 current 16.
Transmit list 03b8f200 vs. c3b8f200.
0: @c3b8f200 length 8000002a status 0000002a
1: @c3b8f210 length 8000002a status 0000002a
2: @c3b8f220 length 8000002a status 0000002a
3: @c3b8f230 length 8000002a status 0000002a
4: @c3b8f240 length 8000002a status 0000002a
5: @c3b8f250 length 8000002a status 0000002a
6: @c3b8f260 length 8000002a status 0000002a
7: @c3b8f270 length 8000002a status 0000002a
8: @c3b8f280 length 8000002a status 0000002a
9: @c3b8f290 length 8000002a status 0000002a
10: @c3b8f2a0 length 8000002a status 0000002a
11: @c3b8f2b0 length 8000002a status 0000002a
12: @c3b8f2c0 length 8000002a status 0000002a
13: @c3b8f2d0 length 8000002a status 0000002a
14: @c3b8f2e0 length 8000002a status 8000002a
15: @c3b8f2f0 length 8000002a status 8000002a
eth0: Resetting the Tx
--- Here is some information about the drivers.Linux version 2.3.99-pre6 (root@kpc) (gcc version 2.95.2 20000313 (Debian GNU/Linux)) #1 Tue Apr 25 12:31:37 EDT 2000
3c59x.c:v0.99L+LK1.1.2+AKPM 24 Apr 2000 Donald Becker and others http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html eth0: 3Com PCI 3c900 Boomerang 10Mbps Combo at 0xe800, 00:60:08:e3:da:66, IRQ 11 8K word-wide RAM 3:5 Rx:Tx split, autoselect/10baseT interface. Enabling bus-master transmits and whole-frame receives.
I got that from 'dmesg' if you need anything else let me know.
-- <>------------------------==--==------------------------<> | khromy :http://khromy.ath.cx/beta/khromy.pgp | | :khromy@khromy.ath.cx | <>------------------------==--==------------------------<>
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Apr 30 2000 - 21:00:10 EST