On Thu, 27 Apr 2000, Meino Christian Cramer wrote:
> Hi!
>
> Two different errors are to be reported with linux-2.3.99-pre6
>
> ------------------------------------------------------------------------------------
>
> First one:
> As configuration I have set:
>
> CONFIG_BLK_DEV_IDEDMA_PCI=y
> CONFIG_IDEDMA_PCI_AUTO=y
> CONFIG_BLK_DEV_IDEDMA=y
> CONFIG_IDEDMA_PCI_EXPERIMENTAL=y
> CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_VIA_TUNING is missing!
> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio <<<!!!
This only acknowledges that a bit is set in the DMA config space.
> ide0: VIA Bus-Master (U)DMA Timing Config Success
> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
> ide1: VIA Bus-Master (U)DMA Timing Config Success
> hda: ST313032A, ATA DISK drive
> hdc: Pioneer DVD-ROM ATAPIModel DVD-103S 011, ATAPI CDROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: 25434228 sectors (13022 MB) w/512KiB Cache, CHS=25232/16/63
> hdc: ATAPI DVD-ROM drive, 512kB Cache, (U)DMA
>
> This said me, that /dev/hda is running with DMA enabled...
No.
hda: 25434228 sectors (13022 MB) w/512KiB Cache, CHS=25232/16/63 UDMA
tells you DMA is running.
Procfs.........not again.........
Andre Hedrick
The Linux ATA/IDE guy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Apr 30 2000 - 21:00:13 EST