Hi,
at least all 2.3.99 kernels stop the boot process after detecting the
second IDE-Controller.
My board is an Asus SP98AGP-X.
00:00.1 IDE interface: Silicon Integrated Systems 5513 (rev d0)
Thanks for your help,
Werner
Logs (2.3.99-pre6 with hdc=noprobe hdd=noprobe) :
-------------------------------------------------
Uniform Multi-Platform E-IDE driver Revision: 6.30
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
SIS5513: IDE controller on PCI bus 00 dev 01
SIS5513: not 100% native mode: will probe irqs later
SiS5591
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA
hda: IBM-DHEA-36481, ATA DISK drive
hdb: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 12692736 sectors (6499 MB) w/472KiB Cache, CHS=790/255/63, UDMA(33)
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
hdb:<3>ide-scsi: hdb: unsupported command in request queue (0)
end_request: I/O error, dev 03:40 (hdb), sector 0
unable to read partition table
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
scsi : 1 host.
Vendor: IOMEGA Model: ZIP 100 Rev: 13.A
Type: Direct-Access ANSI SCSI revision: 00
Detected scsi removable disk sda at scsi0, channel 0, id 0, lun 0
scsi : detected 1 SCSI disk total.
sda : READ CAPACITY failed.
sda : status = 0, message = 00, host = 0, driver = 28
sda : extended sense code = 2
sda : block size assumed to be 512 bytes, disk size 1GB.
sda: I/O error: dev 08:00, sector 0
unable to read partition table
older Logs with 2.3.41:
-----------------------
kernel: SIS5513: IDE controller on PCI bus 00 dev 01
Apr 29 21:58:20 localhost kernel: SIS5513: not 100% native mode: will
probe irqs
later
Apr 29 21:58:20 localhost kernel: ide0: BM-DMA at 0xd000-0xd007,
BIOS settin
gs: hda:DMA, hdb:pio
Apr 29 21:58:20 localhost kernel: ide1: BM-DMA at 0xd008-0xd00f,
BIOS settin
gs: hdc:DMA, hdd:DMA
Apr 29 21:58:20 localhost kernel: hda: IBM-DHEA-36481, ATA DISK drive
Apr 29 21:58:20 localhost kernel: hdb: IOMEGA ZIP 100 ATAPI, ATAPI
FLOPPY drive
Apr 29 21:58:20 localhost kernel: hdc: CR-2801TE, ATAPI CDROM drive
Apr 29 21:58:20 localhost kernel: hdd: ATAPI CDROM, ATAPI CDROM drive
Apr 29 21:58:20 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Apr 29 21:58:20 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
Apr 29 21:58:20 localhost kernel: hda: IBM-DHEA-36481, 6197MB w/472kB
Cache, CHS
=790/255/63
Apr 29 21:58:20 localhost kernel: Partition check:
Apr 29 21:58:20 localhost kernel: hda: hda1 hda2 < hda5 hda6 hda7 hda8
hda9 >
Apr 29 21:58:20 localhost kernel: hdb:<3>ide-scsi: hdb: unsupported
command in
request queue (0)
Apr 29 21:58:20 localhost kernel: end_request: I/O error, dev 03:40
(hdb), secto
r 0
Apr 29 21:58:20 localhost kernel: unable to read partition table
Apr 29 21:58:20 localhost kernel: scsi0 : SCSI host adapter emulation
for IDE AT
API devices
Apr 29 21:58:20 localhost kernel: scsi : 1 host.
Apr 29 21:58:20 localhost kernel: Vendor: IOMEGA Model: ZIP
100 R
ev: 13.A
Apr 29 21:58:20 localhost kernel: Type:
Direct-Access A
NSI SCSI revision: 00
Apr 29 21:58:20 localhost kernel: Vendor: MITSUMI Model:
CR-2801TE R
ev: 1.10
Apr 29 21:58:20 localhost kernel: Type:
CD-ROM A
NSI SCSI revision: 02
Apr 29 21:58:20 localhost kernel: Vendor: Model: ATAPI
CDROM R
ev: 2.30
Apr 29 21:58:20 localhost kernel: Type:
CD-ROM A
NSI SCSI revision: 02
Apr 29 21:58:20 localhost kernel: scsi : detected total.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Apr 30 2000 - 21:00:17 EST