At 23:57 06-05-2000, you wrote:
>I overrode that script and force the setup so it doesn't actually fail. I
>would then suggest you try the same and see if it works.
>
>-d
As far as I can tell eth0 isn't registered with the kernel at all:
| rebecca:/home/jag# cat /var/state/pcmcia/stab
| Socket 0: Psion Gold Card V34 Ethernet
| 0 network pcnet_cs 0
| 0 serial serial_cs 0 ttyS1 4 65
| Socket 1: empty
Normally there's an eth0 in there.
Some hints and tips on which commands I want to run?
And wouldn't this be a workaround instead of a fix?
Sincerely,
Peter Annema
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun May 07 2000 - 21:00:20 EST