I have problems with the eepro100 driver on 2.3.99pre3.
When I first compiled the kernel, with egcs 1.1.2, the driver did not
exhibit any problems at all.
I later moved to gcc2.7.2.3 (from other reasons), and began to get the
following messages:
eth0: Trying to restart the transmitter...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out: status 0050 0070 at 323442/323454 command
000c0000.
eth0: Trying to restart the transmitter...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out: status 0050 0070 at 323499/323511 command
000c0000.
The init sequence:
eepro100.c:v1.09j+LK1.0 Feb 13, 2000 Linux Kernel Team
http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
eth0: Intel PCI EtherExpress Pro100 at 0xc8800000, 00:90:27:77:5E:F7, IRQ
16.
Receiver lock-up bug exists -- enabling work-around.
Board assembly 721383-006, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
Is there any known bug with the driver and gcc2.7.2.3?
Thanks in advance,
Ariel Eizenberg
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon May 15 2000 - 21:00:10 EST