On Tue, 9 May 2000, Tigran Aivazian wrote:
> Hi,
>
> The card I have is Hauppauge BT878 (id 0x13eb0070) and it worked with
> pre7-6 but panics on boot with pre7-8. I will now compile it (and i2c) as
> a module and see if I can get more details.
>
hmmm, it works fine as a module:
$ lsmod
Module Size Used by
bsd_comp 4312 0 (autoclean)
tuner 3148 1 (autoclean)
bttv 53700 0 (autoclean)
i2c-algo-bit 7400 1 (autoclean) [bttv]
i2c-core 12032 0 (autoclean) [tuner bttv i2c-algo-bit]
videodev 3168 3 (autoclean) [bttv]
$
Linux video capture interface: v1.00
i2c-core.o: i2c core module
i2c-algo-bit.o: i2c bit algorithm module
bttv: driver version 0.7.25 loaded
bttv: using 2 buffers with 2080k (4160k total) for capture
bttv0: Brooktree Bt878 (rev 2) bus: 0, devfn: 80, irq: 18,
memory: 0xec000000.
bttv: 1 Bt8xx card(s) found.
i2c-algo-bit.o: Adapter: bt848 #0 scl: 1 sda: 1 -- testing...
i2c-algo-bit.o:1 scl: 1 sda: 0
i2c-algo-bit.o:2 scl: 1 sda: 1
i2c-algo-bit.o:3 scl: 0 sda: 1
i2c-algo-bit.o:4 scl: 1 sda: 1
i2c-algo-bit.o: bt848 #0 passed test.
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: model: BT878(Hauppauge new (bt878))
bttv0: Hauppauge eeprom: tuner=Philips FI1246 MK2 (1)
bttv0: Hauppauge msp34xx: reset line init
bttv0: i2c: checking for MSP34xx @ 0x80... not found
i2c-core.o: adapter unregistered: bt848 #0
i2c-algo-bit.o: Adapter: bt848 #0 scl: 1 sda: 1 -- testing...
i2c-algo-bit.o:1 scl: 1 sda: 0
i2c-algo-bit.o:2 scl: 1 sda: 1
i2c-algo-bit.o:3 scl: 0 sda: 1
i2c-algo-bit.o:4 scl: 1 sda: 1
i2c-algo-bit.o: bt848 #0 passed test.
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA8425 @ 0x82... not found
bttv0: i2c: checking for TDA985x @ 0xb6... not found
i2c-core.o: driver i2c TV tuner driver registered.
tuner: chip found @ 0x61
tuner: type set to 1 (Philips PAL_I)
bttv0: i2c attach [Philips PAL_I]
i2c-core.o: client [Philips PAL_I] registered to adapter [bt848
#0](pos. 0).
bttv0: PLL: 28636363 => 35468950 ... ok
tuner: tv freq set to 511.25
tuner: tv freq set to 511.25
tuner: tv freq set to 567.25
tuner: tv freq set to 487.25
tuner: tv freq set to 543.25
tuner: tv freq set to 599.25
tuner: tv freq set to 543.25
tuner: tv freq set to 543.25
tuner: tv freq set to 487.25
tuner: tv freq set to 511.25
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon May 15 2000 - 21:00:13 EST