On Sat, May 13, 2000 at 10:13:46AM +1000, Keith Owens wrote:
> Robert Collier wrote:
> >eth0: Xircom Cardbus Adapter (DEC 21143 compatible mode) rev 3 at 0x1400,
> > 00:06:29:15:3B:B8, IRQ 9.
> That MAC address does not look right, 00:06:29 is IBM, Xircom cards
> should be 00:10:A4. Check the MAC on the system that works, what does
> that say?
Thats correct, it's an "IBM 10/100 EtherJet" (P/N 08L3148), but the
card appears to have a tulip chipset.
I will try with the standard tulip driver aswell.
> It looks like pre7 is not reading the eeprom correctly. What does
> pcmcia-cs/debug-tools/dump_cis report?
Under 2.3.99-pre3:
squeamish:~# dump_cis
Socket 0:
no CIS present
squeamish:~# cardctl ident
Socket 0:
no product info available
Also, 'ifconfig eth0 down; sync; cardctl eject", and the physicaly
ejecting the card causes a total lockup of the machine under pre3 (I
just did this).
- Rob.
-- Robert Collier Windows 2001: "I'm Sorry rob@ossifrage.net Dave, I can't do that."- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon May 15 2000 - 21:00:23 EST