Make sure when you configure your kernel CONFIG_SCSI_MULTI_LUN is set to
'y'.
The question appears as, "Probe all LUNs on each SCSI device (NEW)".
It sounds like you said 'n'. The help for the option says it is safer,
and that most people should, say N. But in your case you do need it.
On Mon, 15 May 2000, Andrej Filipcic wrote:
>
> I have an UP2000 alpha linux, RH6.2, linus kernel 2.2.15, with a Mylex
> DAC960SX scsi-to-scsi controler. There are three logical disks configured,
> however, only the first is auto-detected by the kernel:
--
...and sometimes, late at night I get these twitches. Like dead people get.
(Or, as I prefer to call them, perfect computer users)
--The BOFH
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon May 15 2000 - 21:00:25 EST