Re: 2.2.15 with eepro100: eth0: Too much work at interrupt

From: Kamlesh Bans (kbans@corsair.com)
Date: Tue May 16 2000 - 16:21:52 EST

At the suggestion of Alan Cox (thanks Alan), I tried the 2.2.14 eepro100.c
(Revision: 1.18 $ 1999/12/29) instead of the 2.2.15 one (Revision: 1.20.2.3
$ 2000/03/02) with the 2.2.15 kernel, however I am getting the same
problem. Excerpt from kern.log (still wrong date):

May 8 10:44:30 newton kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
May 8 10:44:30 newton kernel: eepro100.c: $Revision: 1.18 $ 1999/12/29
Modified by Andrey V. Savochkin <saw@msu.ru>
May 8 10:44:30 newton kernel: eth0: Invalid EEPROM checksum 0x0000, check
settings before activating this device!
May 8 10:44:30 newton kernel: eth0: Intel PCI EtherExpress Pro100 at
0xc8808000, 00:00:00:00:00:00, IRQ 11.
May 8 10:44:30 newton kernel: Board assembly 000000-000, Physical
connectors present:
May 8 10:44:30 newton kernel: Primary interface chip None PHY #0.
May 8 10:44:30 newton kernel: General self-test: passed.
May 8 10:44:30 newton kernel: Serial sub-system self-test: passed.
May 8 10:44:30 newton kernel: Internal registers self-test: passed.
May 8 10:44:30 newton kernel: ROM checksum self-test: passed (0x49caa8d6).
May 8 10:44:30 newton kernel: Receiver lock-up workaround activated.
May 8 10:44:30 newton kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
May 8 10:44:30 newton kernel: eepro100.c: $Revision: 1.18 $ 1999/12/29
Modified by Andrey V. Savochkin <saw@msu.ru>

May 8 10:44:30 newton kernel: mdio_read() timed out with val = 08040000.
May 8 10:44:30 newton kernel: eth0: Too much work at interrupt, status=0x2000.
May 8 10:44:30 newton kernel: mdio_read() timed out with val = 08000000.
May 8 10:44:30 newton kernel: eth0: Too much work at interrupt, status=0x2000.
May 8 10:44:30 newton last message repeated 2 times
May 8 10:44:30 newton kernel: eth0: Too much work at interrupt, status=0x4000.
May 8 10:44:30 newton kernel: mdio_read() timed out with val = 08050000.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

This archive was generated by hypermail 2b29 : Tue May 23 2000 - 21:00:11 EST