Drop a tuning patch on it first and see if it corrects the issue
Expecially if it is an IronGate North Bridge and VIA South Bridge pair.
On Thu, 18 May 2000, Andreas Schuldei wrote:
> I tried to get an oops out of 2.2.15 both with screenoutput and with
> kmsgdump (to floppy) but did not succeed.
>
> I seem to be able to relyably crash the system with the bonnie++
> benchmark. some time after it starts doing the sequential file cration
> test it crashes.
>
> Linux version 2.2.15 (root@petrus) (gcc version 2.95.2 20000313 (Debian
> GNU/Linux)) #3 Thu May 18 14:44:48 CEST 2000
> Detected 654587112 Hz processor.
> Console: colour VGA+ 80x60
> Calibrating delay loop... 1304.17 BogoMIPS
> Memory: 64612k/66556k available (652k kernel code, 412k reserved, 844k
> data, 36k init)
> Dentry hash table entries: 16384 (order 5, 128k)
> Buffer cache hash table entries: 65536 (order 6, 256k)
> Page cache hash table entries: 16384 (order 4, 64k)
> CPU: L1 I Cache: 64K L1 D Cache: 64K
> CPU: L2 Cache: 512K
> CPU: AMD AMD Athlon(tm) Processor stepping 01
> Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
> PCI: PCI BIOS revision 2.10 entry at 0xfd9e1
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> PCI: Enabling I/O for device 00:00
> Linux NET4.0 for Linux 2.2
> Based upon Swansea University Computer Society NET3.039
> NET4: Unix domain sockets 1.0 for Linux NET4.0.
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP
> TCP: Hash tables configured (ehash 65536 bhash 65536)
> Starting kswapd v 1.5
> parport0: PC-style at 0x378 (0x778) [SPP,ECP,ECPPS2]
> pty: 256 Unix98 ptys configured
> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.12)
> Real Time Clock Driver v1.09
> VP_IDE: IDE controller on PCI bus 00 dev 21
> VP_IDE: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
> ide0: VIA Bus-Master (U)DMA Timing Config Success
> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
> ide1: VIA Bus-Master (U)DMA Timing Config Success
> hda: Maxtor 91021U2, ATA DISK drive
> hdc: CD-540E, ATAPI CDROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: Maxtor 91021U2, 9770MB w/512kB Cache, CHS=1245/255/63
> Partition check:
> hda: hda1 hda2 hda3 < hda5 > hda4
> VFS: Mounted root (ext2 filesystem) readonly.
> Freeing unused kernel memory: 36k freed
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.rutgers.edu
> Please read the FAQ at http://www.tux.org/lkml/
>
Andre Hedrick
The Linux ATA/IDE guy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue May 23 2000 - 21:00:15 EST