On Sun, 21 May 2000, Wolfgang Fritz wrote:
> The problem is in the function
> void __init init_ht6560b (void)
> It calls the function check_region, which finally calls kmalloc. This
> kmalloc fails because the cache_sizes array is not yet initialized.
Yes, init_ht6560b(void) is now called too early to use check_region.
This very same problem should also occur in umc8672 driver.
Easiest but not so good solution is (of course) removing check_region and
reserve_region calls. But init_ht6560b(void) and init_umc8672(void) should
really be called later.
--- ht6560b.c.alkup Mon May 22 10:20:47 2000
+++ ht6560b.c Mon May 22 10:26:42 2000
@@ -309,34 +309,29 @@
{
int t;
- if (check_region(HT_CONFIG_PORT,1)) {
- printk(KERN_ERR "ht6560b: PORT %#x ALREADY IN USE\n", HT_CONFIG_PORT);
- } else {
- if (try_to_init_ht6560b()) {
- request_region(HT_CONFIG_PORT, 1, ide_hwifs[0].name);
- ide_hwifs[0].chipset = ide_ht6560b;
- ide_hwifs[1].chipset = ide_ht6560b;
- ide_hwifs[0].selectproc = &ht6560b_selectproc;
- ide_hwifs[1].selectproc = &ht6560b_selectproc;
- ide_hwifs[0].tuneproc = &tune_ht6560b;
- ide_hwifs[1].tuneproc = &tune_ht6560b;
- ide_hwifs[0].serialized = 1; /* is this needed? */
- ide_hwifs[1].serialized = 1; /* is this needed? */
- ide_hwifs[0].mate = &ide_hwifs[1];
- ide_hwifs[1].mate = &ide_hwifs[0];
- ide_hwifs[1].channel = 1;
-
- /*
- * Setting default configurations for drives
- */
- t = (HT_CONFIG_DEFAULT << 8);
- t |= HT_TIMING_DEFAULT;
- ide_hwifs[0].drives[0].drive_data = t;
- ide_hwifs[0].drives[1].drive_data = t;
- t |= (HT_SECONDARY_IF << 8);
- ide_hwifs[1].drives[0].drive_data = t;
- ide_hwifs[1].drives[1].drive_data = t;
- } else
- printk(KERN_ERR "ht6560b: not found\n");
- }
+ if (try_to_init_ht6560b()) {
+ ide_hwifs[0].chipset = ide_ht6560b;
+ ide_hwifs[1].chipset = ide_ht6560b;
+ ide_hwifs[0].selectproc = &ht6560b_selectproc;
+ ide_hwifs[1].selectproc = &ht6560b_selectproc;
+ ide_hwifs[0].tuneproc = &tune_ht6560b;
+ ide_hwifs[1].tuneproc = &tune_ht6560b;
+ ide_hwifs[0].serialized = 1; /* is this needed? */
+ ide_hwifs[1].serialized = 1; /* is this needed? */
+ ide_hwifs[0].mate = &ide_hwifs[1];
+ ide_hwifs[1].mate = &ide_hwifs[0];
+ ide_hwifs[1].channel = 1;
+
+ /*
+ * Setting default configurations for drives
+ */
+ t = (HT_CONFIG_DEFAULT << 8);
+ t |= HT_TIMING_DEFAULT;
+ ide_hwifs[0].drives[0].drive_data = t;
+ ide_hwifs[0].drives[1].drive_data = t;
+ t |= (HT_SECONDARY_IF << 8);
+ ide_hwifs[1].drives[0].drive_data = t;
+ ide_hwifs[1].drives[1].drive_data = t;
+ } else
+ printk(KERN_ERR "ht6560b: not found\n");
}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue May 23 2000 - 21:00:21 EST