It is IDE though. It worked in 2.2.14 or such just fine. I don't use
it all the time, so I'm not sure when it went away.
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x0860-0x0867, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x0868-0x086f, BIOS settings: hdc:pio, hdd:pio
hda: IBM-DARA-206000, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: IBM-DARA-206000, 5729MB w/418kB Cache, CHS=730/255/63, UDMA
Partition check:
hda: hda1 hda3 hda4
VFS: Mounted root (ext2 filesystem) readonly.
ide1=hdc, is the cdrom.
Robert
Thus spake Alan Cox (alan@lxorguk.ukuu.org.uk):
> > {1}:bob:/root>insmod ide-cd
> > Using /lib/modules/2.2.15/block/ide-cd.o
> > /lib/modules/2.2.15/block/ide-cd.o: unresolved symbol init_cdrom_command_Rfd04f5eb
>
> That seems reasonable
>
> > {0}:bob:/lib/modules/2.2.15>insmod cdrom
> > Using /lib/modules/2.2.15/cdrom/cdrom.o
> > {0}:bob:/lib/modules/2.2.15>insmod ide-cd
> > Using /lib/modules/2.2.15/block/ide-cd.o
>
> Ok so the symbols are fine. You just dont appear to have an IDE cdrom. What
> does dmesg show - any other messages
>
:wq!
---------------------------------------------------------------------------
Robert L. Harris | Microso~1 :
Senior System Engineer | For when quality, reliability
at RnD Consulting | and security just aren't
\_ that important!
DISCLAIMER:
These are MY OPINIONS ALONE. I speak for no-one else.
FYI:
perl -e 'print $i=pack(c5,(41*2),sqrt(7056),(unpack(c,H)-2),oct(115),10);'
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue May 23 2000 - 21:00:24 EST