tulip broken in 2.4.0-t1-ac6/7

• Next message: Steve Dodd: "Re: LINUX Jobs for 2.4 update"
• Previous message: Alexander Viro: "Re: Loopback (dir->dir) mounting (NOT -o loop)"
• Next in thread: Marco Colombo: "Re: tulip broken in 2.4.0-t1-ac6/7"
• Reply: Marco Colombo: "Re: tulip broken in 2.4.0-t1-ac6/7"
• Reply: Jeff Garzik: "Re: tulip broken in 2.4.0-t1-ac6/7"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

AC> 2.4.0-test1-ac6
AC> o Tulip updates (Jeff Garzik)

This breaks my 21143.
NETDEV WATCHDOG: eth0: transmit timed out
is all I get. de4x5 works. The card is in 100mbit mode, half-duplex.
ac4 worked OK. ac7 was the next I tried and it doesn't work. ac6 touched
tulip so it's probably the cause.

Linux Tulip driver version 0.9.5 (May 30, 2000)
eth0: Digital DS21143 Tulip rev 65 at 0x6400, 00:48:54:12:83:3F, IRQ 10.
eth0: EEPROM default media type Autosense.
eth0: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
eth0: MII transceiver #17 config 3000 status 782d advertising 01e1.

Only the last line and the version differ, earlier the last line read
eth0: MII transceiver #17 config 3000 status 7829 advertising 01e1.

-- 
Meelis Roos (mroos@linux.ee)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

• Next message: Steve Dodd: "Re: LINUX Jobs for 2.4 update"
• Previous message: Alexander Viro: "Re: Loopback (dir->dir) mounting (NOT -o loop)"
• Next in thread: Marco Colombo: "Re: tulip broken in 2.4.0-t1-ac6/7"
• Reply: Marco Colombo: "Re: tulip broken in 2.4.0-t1-ac6/7"
• Reply: Jeff Garzik: "Re: tulip broken in 2.4.0-t1-ac6/7"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Wed Jun 07 2000 - 21:00:17 EST