'tarot' is the machine acting as gateway.
'heathen' is a machine on my private network.
ipmasq compatibility module:
heathen:~# ping -c 1 www.userfriendly.org
PING www.userfriendly.org (204.174.18.129): 56 data bytes
64 bytes from 204.174.18.129: icmp_seq=0 ttl=242 time=89.3 ms
wrong data byte #10 should be 0xa but was 0x27
14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27 28 29
2a 2b 2c 2d 2e 2f 30 31 32 33
34 35 36 37 0 0 0 0 0 0 0 0 0 0 0 0
traceroute does not show any problems.
telnet does not show any problems.
atyfb:
I pass "video=800x600" to the kernel. -ac16 initialised atyfb into 80x25,
while -test1 initialised correctly to 100x37.
ALi M15x3 IDE driver:
I'm going to test this in DMA mode and reply. With -test1 I get a very,
very nasty series of oopsen. I have an M1523 controller that predates udma
support, and doesn't have DMA support under 2.2 series.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Jun 15 2000 - 21:00:28 EST