Re: Semi up to date JOBS list

From: David Ford (david@kalifornia.com)
Date: Wed Jun 14 2000 - 07:18:25 EST


Andre Hedrick wrote:

> > > Boot Time Failures
> > > ------------------
> > > Use PCI DMA 'lost interrupt' problem with some hw [which ?]
> > > (NEC Versa LX with PIIX tuning)
> > Sorry, can't do lspci, /proc doesn't have bus #2 in it and lspci aborts.
>
> Yes you can
>
> lspci -bxxxvvd 8086:
>
> Does not matter.....hunt for the vender ID

Ok, not sure.. Earlier I rebooted because VM killed X and something else, I wasn't able to
blindly do anything. Before this, lspci was complaining about a problem with Bus #2. I've never
had a #2 bus before and after the reboot I again didn't have it and lspci ran fine.

For above:

00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 03)
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR-
<PERR-
        Latency: 64
        Region 0: Memory at e0000000 (32-bit, prefetchable)
        Capabilities: [a0] AGP version 1.0
                Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
                Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00: 86 80 90 71 06 00 10 22 03 00 00 06 00 40 00 00
10: 08 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 0c 22 00 00 00 00 00 09 03 10 11 11 00 00 33 33
60: 08 08 10 18 18 18 18 18 00 00 40 01 00 a0 00 00
70: 20 1f 0a 38 51 00 08 01 26 0d 8c 38 00 00 00 00
80: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 70 00 00 04 61 00 00 00 05 00 00 00 00 00 00
a0: 02 00 10 00 03 02 00 1f 00 00 00 00 00 00 00 00
b0: 80 20 00 00 00 00 00 00 00 00 ec 0b 00 00 00 00
c0: 00 00 00 00 00 00 00 00 18 0c 00 00 20 00 00 00
d0: b8 00 0d 05 00 00 00 00 0c 00 00 00 00 00 00 00
e0: 4c ad ff bb 8a 3e 00 80 2c d3 f7 cf 9d 3e 00 00
f0: 40 01 00 00 00 f8 00 60 20 0f 00 00 00 00 00 00

00:07.0 Bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR-
FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
<PERR-
        Latency: 0
00: 86 80 10 71 0f 00 80 02 02 00 80 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 32 04
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 0a 05 80 09 d0 00 00 00 00 fe 00 00 00 00 00 00
70: 00 00 00 00 00 00 0c 0c 00 00 00 00 00 00 00 00
80: 00 00 07 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 06 47 51 70 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 25 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 30 0f 00 00 00 00 00 00

00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master])
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
<PERR-
        Latency: 32
        Region 4: I/O ports at ffa0
00: 86 80 11 71 05 00 80 02 01 80 01 01 00 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: a1 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 07 e3 07 e3 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 30 0f 00 00 00 00 00 00

The problem is when PIIX4 tuning is enabled, the laptop will hang on boot at the stage of
partition checking. The only way out of it is to hard power off. The machine doesn't respond to
any other input.

-d

--
"The difference between 'involvement' and 'commitment' is like an
eggs-and-ham breakfast: the chicken was 'involved' - the pig was
'committed'."


- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Thu Jun 15 2000 - 21:00:31 EST