Re: Parport ZIP (imm) not working in 2.4.0-test1-ac22-riel

From: Matthew S. Hallacy (poptix@poptix.net)
Date: Wed Jun 21 2000 - 14:10:14 EST


Mount was giving me this same error on a vfat partition, because I hadnt
build vfat support into the kernel, or as a module, I would check that
first.

                        -poptix

PS: perhaps mount should provide a better error..

On Wed, 21 Jun 2000, Tim Waugh wrote:

> On Tue, Jun 20, 2000 at 09:48:21PM -0400, Ari Pollak wrote:
>
> > (~)$ mount /mnt/zip
> > parport0: irq 7 detected
> > imm: Version 2.03 (for Linux 2.0.0)
> > imm: Found device at ID 6, Attempting to use EPP 32 bit
> > imm: Found device at ID 6, Attempting to use PS/2
> > imm: Communication established with ID 6 using PS/2
> > scsi0 : Iomega VPI2 (imm) interface
> > scsi : 1 host.
> > Vendor: IOMEGA Model: ZIP 100 Rev: P.04
> > Type: Direct-Access ANSI SCSI revision: 02
> > mount: /dev/sda4 has wrong major or minor number
>
> Do you have devfs enabled in this kernel? What about SCSI? What does
> 'lsmod' say after failing to mount?
>
> Tim.
> */
>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Fri Jun 23 2000 - 21:00:22 EST