Get a newer kernel "Acer 50x ATAPI CDROM" is a broken ATAPI.
On 24 Jun 2000, Fred & Chereise Farleigh wrote:
> I am experiencing severe errors with my IDE subsystem. It worked perfectly on
> RedHat 6.0, but sometime at RedHat6.1 things started to break. I did not
> notice the problem because it seemed somewhat intermmitent and I don't use the
> CD much. At 6.2 the error is now solid. I replaced my CDROM with new and same
> errors. I added a new HD to the same IDE channel and it works flawlessly. I
> then stripped down the system (removed all cards, new HD and reset BIOS) to
> verify problem was real.
>
> I have an Acer 50x ATAPI CDROM (I believe LiteOn was OEM), and previous CD-ROM
> was LiteON 40x. I have ASUS P5A MB with ALi 15xx IDE onboard controllers.
>
> Thank you and regards,
> Fred Farleigh
> farleigh@dis.anl.gov
>
>
>
> Linux version 2.2.14-12 (root@fredsmachine) (gcc version egcs-2.91.66
> 19990314/L
> inux (egcs-1.1.2 release)) #10 Wed Jun 21 20:09:27 CDT 2000
> [farleigh@fredsmachine farleigh]$ dmesg | more
> Linux version 2.2.14-12 (root@fredsmachine) (gcc version egcs-2.91.66
> 19990314/Linux (egcs-1.1.2 release)) #10 Wed Jun 21 20:09:27 CDT 2000
> Detected 451039740 Hz processor.
> Console: colour dummy device 80x25
> Calibrating delay loop... 901.12 BogoMIPS
> Memory: 127648k/131008k available (1212k kernel code, 412k reserved, 1672k
> data, 64k init, 0k bigmem)
> Dentry hash table entries: 262144 (order 9, 2048k)
> Buffer cache hash table entries: 131072 (order 7, 512k)
> Page cache hash table entries: 32768 (order 5, 128k)
> VFS: Diskquotas version dquot_6.4.0 initialized
> CPU: AMD AMD-K6(tm) 3D processor stepping 0c
> Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
> PCI: PCI BIOS revision 2.10 entry at 0xf06c0
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> Linux NET4.0 for Linux 2.2
> Based upon Swansea University Computer Society NET3.039
> NET4: Unix domain sockets 1.0 for Linux NET4.0.
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP, IGMP
> TCP: Hash tables configured (ehash 131072 bhash 65536)
> klips_debug:ipsec_init: ipsec module loading. freeswan version: 1.4
> klips_debug: rj_init: version: RCSID $Id: radij.c,v 1.25 2000/01/21 06:21:47
> rgb Exp $
> FreeS/WAN: initialising PF_KEY domain sockets.
> early initialization of device ipsec0 is deferred
> early initialization of device ipsec1 is deferred
> early initialization of device ipsec2 is deferred
> early initialization of device ipsec3 is deferred
> Initializing RT netlink socket
> Starting kswapd v 1.5
> vesafb: framebuffer at 0xe4000000, mapped to 0xc8009000, size 32768k
> vesafb: mode is 1024x768x16, linelength=2048, pages=20
> vesafb: protected mode interface info at c000:4bba
> vesafb: scrolling: redraw
> vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
> Console: switching to colour RAM disk driver initialized: 16 RAM disks of
> 4096K size
> PCI_IDE: unknown IDE controller on PCI bus 00 device 78, VID=10b9, DID=5229
> PCI_IDE: not 100% native mode: will probe irqs later
> PCI_IDE: simplex device: DMA disabled
> ide0: PCI_IDE Bus-Master DMA disabled (BIOS)
> PCI_IDE: simplex device: DMA disabled
> ide1: PCI_IDE Bus-Master DMA disabled (BIOS)
> hda: FUJITSU MPD3064AT, ATA DISK drive
> hdb: Maxtor 52049U4, ATA DISK drive
> hdc: Maxtor 92049U6, ATA DISK drive
> hdd: ATAPI CD ROM DRIVE 50X MAX, ATAPI CDROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: FUJITSU MPD3064AT, 6187MB w/512kB Cache, CHS=788/255/63
> hdb: Maxtor 52049U4, 19541MB w/2048kB Cache, CHS=2491/255/63
> hdc: Maxtor 92049U6, 19544MB w/2048kB Cache, CHS=39709/16/63
> hdd: packet command error: status=0x51 { DriveReady SeekComplete Error }
> hdd: packet command error: error=0x54
> ATAPI device hdd:
> Error: Illegal request -- (Sense key=0x05)
> Parameter list length error -- (asc=0x1a, ascq=0x00)
> The failed "Mode Sense" packet command was:
> "5a 00 2a 00 00 00 00 00 18 00 00 00 "
> hdd: packet command error: status=0x51 { DriveReady SeekComplete Error }
> hdd: packet command error: error=0x54
> ATAPI device hdd:
> Error: Illegal request -- (Sense key=0x05)
> frame buffer device 128x48
> fb0: VESA VGA frame buffer device
> Detected PS/2 Mouse Port.
> Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
> ttyS01 at 0x02f8 (irq = 3) is a 16550A
> pty: 256 Unix98 ptys configured
> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.9)
> Real Time Clock Driver v1.09
> Parameter list length error -- (asc=0x1a, ascq=0x00)
> The failed "Mode Sense" packet command was:
> "5a 00 2a 00 00 00 00 00 18 00 00 00 "
> Uniform CDROM driver Revision: 2.56
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
> raid5: measuring checksumming speed
> raid5: MMX detected, trying high-speed MMX checksum routines
> pII_mmx : 958.596 MB/sec
> p5_mmx : 840.486 MB/sec
> 8regs : 651.129 MB/sec
> 32regs : 454.152 MB/sec
> using fastest function: pII_mmx (958.596 MB/sec)
> scsi : 0 hosts.
> scsi : detected total.
> klips_debug:ipsec_tunnel_init: initialisation of device: ipsec0
> klips_debug:ipsec_tunnel_init: initialisation of device: ipsec1
> klips_debug:ipsec_tunnel_init: initialisation of device: ipsec2
> klips_debug:ipsec_tunnel_init: initialisation of device: ipsec3
> md.c: sizeof(mdp_super_t) = 4096
> Partition check:
> hda: hda1 hda2 < hda5 >
> hdb: unknown partition table
> hdc: hdc1 hdc2 < hdc5 hdc6 hdc7 hdc8 >
> autodetecting RAID arrays
> autorun ...
> ... autorun DONE.
> VFS: Mounted root (ext2 filesystem) readonly.
> Freeing unused kernel memory: 64k freed
> Adding Swap: 499928k swap-space (priority -1)
> Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
> SB 4.16 detected OK (220)
> sb: Interrupt test on IRQ5 failed - Probable IRQ conflict
> YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft
> 1993-1996
> tulip.c:v0.91g-ppc 7/16/99 becker@cesdis.gsfc.nasa.gov
> eth0: ASIX AX88140 rev 3 at 0xb400, 00:C0:CA:16:9A:B4, IRQ 4.
> eth0: EEPROM default media type Autosense.
> eth0: Index #0 - Media MII (#11) described by a 21140 MII PHY (1) block.
> eth0: MII transceiver #9 config 3100 status 7829 advertising 01e1.
> CSLIP: code copyright 1989 Regents of the University of California
> PPP: version 2.3.7 (demand dialling)
> PPP line discipline registered.
>
>
>
> ---------------------------
> Fred & Chereise Farleigh
> 365 Lakeview Circle
> Bolingbrook, IL. 60440
> (630)679-1849
>
> ____________________________________________________________________
> Get your own FREE, personal Netscape WebMail account today at http://webmail.netscape.com.
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.rutgers.edu
> Please read the FAQ at http://www.tux.org/lkml/
>
Andre Hedrick
The Linux ATA/IDE guy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Jun 26 2000 - 21:00:04 EST