Hello Marc + Everybody else following
Just a short update for regarding my problem...
I have low - level formatted my drive and the problem still exists. Any
ideas.... I am sure Windows 2000 did something bad to my drive (changed
something in the drive flash rom or similar..)
But nobody so far gave me a solution for the problem. The drive works
perfectly in Win98 + Win 2000 + Bios but the Adaptec 2940 using the
Linux drivers does not see it.
Dietmar
Marc SCHAEFER wrote:
> On Thu, 22 Jun 2000, Dietmar Schnabel wrote:
>
> > Host: scsi0 Channel: 00 Id: 00 Lun: 00
> > Vendor: IBM Model: DPES-31080 Rev: S31K
> > Type: Direct-Access ANSI SCSI revision: 02
>
> A SCSI hard disk, seen by Linux as /dev/sda
>
> > Host: scsi0 Channel: 00 Id: 04 Lun: 00
> > Vendor: IMS Model: CDD2000/00 Rev: 1.26
> > Type: CD-ROM ANSI SCSI revision: 02
> > Host: scsi0 Channel: 00 Id: 06 Lun: 00
> > Vendor: TOSHIBA Model: CD-ROM XM-5401TA Rev: 3605
> > Type: CD-ROM ANSI SCSI revision: 02
>
> Which one of these CD ROMs is your hard drive ? :)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Jul 07 2000 - 21:00:10 EST