Hi, all. I thought I'd try 2.4.0-test5-pre2 with my CardBus card and
see if it works yet. No such luck (my PCMCIA card does, though).
I plugged in an Ositech Jack of Spades CardBus. These are the kernel
messages:
PCI: Enabling device 03:00.0 (0000 -> 0003)
PCI: Found IRQ 11 for device 03:00.0
PCI: The same IRQ used for device 00:04.0
PCI: Failed to allocate resource 0 for PCI device 10b8:0006
failed root[1400:14ff] min[1000] size[100]
failed res[1800:14ff]
PCI: Enabling device 03:00.1 (0000 -> 0003)
PCI: Found IRQ 11 for device 03:00.1
PCI: The same IRQ used for device 00:04.0
PCI: The same IRQ used for device 03:00.0
and this is the output of lspci:
00:00.0 Host bridge: Intel Corporation 440BX - 82443BX (AGP disabled) (rev 02)
00:02.0 VGA compatible controller: Neomagic Corporation NM2160 [MagicGraph 128XD] (rev 01)
00:04.0 CardBus bridge: Texas Instruments PCI1131 (rev 01)
00:04.1 CardBus bridge: Texas Instruments PCI1131 (rev 01)
00:07.0 Bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
03:00.0 Ethernet controller: Standard Microsystems: Unknown device 0006 (rev 01)
03:00.1 Serial controller: Standard Microsystems: Unknown device 0006 (rev 01)
I've got all my PCMCIA/CardBus drivers configured as loadable modules.
So, is this a bug with the PCI code which is disallowing interrupt
sharing, or is something else wrong? Better yet, is there a patch
floating around?
Regards,
Richard....
Permanent: rgooch@atnf.csiro.au
Current: rgooch@ras.ucalgary.ca
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Jul 23 2000 - 21:00:11 EST