On Mon, 7 Aug 2000, Alan Cox wrote:
> > When specifying the IO adress and IRQ, the system gives :
> >
> > scsi0: SCSI bus busy, waiting up to 5 seconds
> > scsi0: bus busy, attempting abort
>
> You almost certainly gave it the wrong parameters/card type. Also this driver
> does not currently work SMP.
>
> For most HP scanner cheap cards
>
> inmsod g_NCR5380 ncr_addr=0x348 ncr_irq=255 ncr_53c400a=1
>
> (from memory)
>
> and build the driver for port based I/O
Ah.. That explains things...
I used : ncr53c400 ncr_addr=0x280 ncr_irq=9
This was taken from README.g_NCR5380
I'll give it another try :)
Thanks,
Igmar
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Aug 15 2000 - 21:00:14 EST