> > You almost certainly gave it the wrong parameters/card type. Also this driver
> > does not currently work SMP.
> >
> > For most HP scanner cheap cards
> >
> > inmsod g_NCR5380 ncr_addr=0x348 ncr_irq=255 ncr_53c400a=1
> >
> > (from memory)
> >
> > and build the driver for port based I/O
insmod g_NCR5380 ncr_addr=0x280 ncr_irq=255 ncr_53c400=1
gives the SCSI bus busy messages, and then hangs the machine.
insmod g_NCR5380 ncr_addr=0x280 ncr_irq=255 ncr53c400a=1
gives Device of resource busy
According to Window the thing is at 0x280, irq 9.
Any hints on how to debug this beast ?
Regards,
Igmar
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Aug 15 2000 - 21:00:14 EST