Alan are there escape error messages in the host.h that address
non-storage SCSI calls? I have heard of this in the past but never gave
it a second thought. I do not see anything that address the issue of
non-storage commands, but then again I am not claiming to know scsi
either.
Cheers,
On Tue, 8 Aug 2000, Alan Cox wrote:
> > insmod g_NCR5380 ncr_addr=0x280 ncr_irq=255 ncr_53c400=1
> > gives the SCSI bus busy messages, and then hangs the machine.
> >
> > insmod g_NCR5380 ncr_addr=0x280 ncr_irq=255 ncr53c400a=1
> > gives Device of resource busy
> >
> > According to Window the thing is at 0x280, irq 9.
> > Any hints on how to debug this beast ?
>
> Try pnpdump - it might be you have the extra expensive (like 2cents/chip)
> ISA PnP version
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.rutgers.edu
> Please read the FAQ at http://www.tux.org/lkml/
>
Andre Hedrick
The Linux ATA/IDE guy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Aug 15 2000 - 21:00:15 EST