Thanks for the input... I really do not want to start porting a driver.
Compaq has a NIC which has up to 4 100BT ports or 2 100BT ports and one
1000BT port.
This is 100% compatable with the Intel e1000.o driver on 2.3.x...
If someone could do the port I would be happy to provide the card
and the testing...
Thanks, Mike...
-----Original Message-----
From: Jes Sorensen [mailto:jes@linuxcare.com]
Sent: Tuesday, August 08, 2000 10:08 AM
To: mjacob@feral.com
Cc: 'Linux Kernel Maillist'
Subject: Re: Need e1000.o (Intel 1GB NIC driver) for 2.4.x
>>>>> "Matthew" == Matthew Jacob <mjacob@feral.com> writes:
Matthew> If I hadn't had a client that had wanted me to specifically
Matthew> do the Intel board (and release it to *BSD- way to go,
Matthew> Traakan!) I certainly wouldn't have bothered, although, as I
Matthew> said, I like the chip's programming model.
Matthew> Netgear is supposed to be very supportive with SDK's.
NetGear OEM's the Alteon card (so do 3Com), both Alteon and 3Com have
been very good at providing me hardware and docs (well I got those
from Alteon) whereas NetGear never bothered to even reply to emails.
Jes
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Aug 15 2000 - 21:00:17 EST