On Fri, 01 Sep 2000, I wrote:
> I have dri working fine in my voodoo3 at home with the above config.In
> work , the kernel module builds normally but when I run X with dri
> uncommented X dies with a message "drm vers 1.1 expected 1.01" or
> Any Ideas?
I have the X server output here:
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.0.1, module version = 0.1.0
(0): [drm] created "i810" driver at busid "PCI:0:1:0"
(0): [drm] added 4096 byte SAREA at 0xc7b7c000
(0): [drm] mapped SAREA 0xc7b7c000 to 0x40015000
(0): [drm] framebuffer handle = 0xd8000000
(0): [drm] added 1 reserved context for kernel
(EE) I810(0): I810DRIScreenInit failed (DRM version = 1.1.0, expected
1.0.x). Disabling DRI.
(0): [drm] failed to remove DRM signal handler
(0): [drm] removed 1 reserved context for kernel
(0): [drm] unmapping 4096 bytes of SAREA 0xc7b7c000 at 0x40015000
(==) I810(0): Write-combining range (0xd8000000,0x2000000)
-- screw you guys, I'm going $HOME
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to firstname.lastname@example.org Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Sep 07 2000 - 21:00:10 EST