Thanks for the info. I can run the script manually to get the NIC on the
network. But, by the mean time before a permanent fix, would it be a good
idea to apply the change I did to allow at least correct initilization for
eth0 ?
Claude.
> -----Original Message-----
> From: David Hinds [SMTP:dhinds@valinux.com]
> Sent: Thursday, September 07, 2000 1:43 PM
> To: Claude LeFrancois (LMC)
> Cc: 'andrewm@uow.edu.au'; 'linux-kernel@vger.kernel.org'
> Subject: Re: PCMCIA: 3CCFE575CT initialization probem under
> 2.4.0-test7
>
> On Thu, Sep 07, 2000 at 12:25:41PM -0400, Claude LeFrancois (LMC) wrote:
> >
> > cardmgr[386]: executing: './network start 3c575_cb'
> > cardmgr[386]: + usage: ifup <device name>
> > cardmgr[386]: start cmd exited with status 1
>
> The new hot plug PCI interface does not provide a method for passing
> the correct device name to cardmgr. There is no fix at this time.
>
> -- Dave
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Sep 07 2000 - 21:00:31 EST