Ask Vojtech ...
He is doing this chipset for linux now.
Cheers,
On Tue, 19 Sep 2000, Dan Aloni wrote:
>
> I've tried to boot 2.4.0-test9-pre2 yesterday and it halted at the point
> where it tried to read the paratition table, outputing all sorts of
> errors (SeekError, IIRC). So I replaced via82cxxx.c with the older
> version from test6 and now it's working.
> Here is what I see with the old via82cxxx.c:
>
> dmesg:
> Linux version 2.4.0-test9 (root@callisto.yi.org) (gcc version 2.95.2 19991024 (release)) #6 Tue Sep 19 01:02:39 IST 2000
> BIOS-provided physical RAM map:
> BIOS-e820: 000000000009fc00 @ 0000000000000000 (usable)
> BIOS-e820: 0000000000000400 @ 000000000009fc00 (usable)
> BIOS-e820: 0000000000010000 @ 00000000000f0000 (reserved)
> BIOS-e820: 0000000000010000 @ 00000000ffff0000 (reserved)
> BIOS-e820: 0000000003f00000 @ 0000000000100000 (usable)
> Scan SMP from c0000000 for 1024 bytes.
> Scan SMP from c009fc00 for 1024 bytes.
> Scan SMP from c00f0000 for 65536 bytes.
> Scan SMP from c0000000 for 4096 bytes.
> On node 0 totalpages: 16384
> zone(0): 4096 pages.
> zone(1): 12288 pages.
> zone(2): 0 pages.
> mapped APIC to ffffe000 (01112000)
> Kernel command line: BOOT_IMAGE=test9 ro root=1603 hdc=5606,255,63 idebus=33 ide0=ata66
> ide_setup: hdc=5606,255,63
> ide_setup: idebus=33
> ide_setup: ide0=ata66
> Initializing CPU#0
> Detected 451029699 Hz processor.
> Console: colour VGA+ 80x25
> Calibrating delay loop... 897.84 BogoMIPS
> Memory: 62672k/65536k available (912k kernel code, 2476k reserved, 70k data, 188k init, 0k highmem)
> Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
> Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
> Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
> Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
> CPU serial number disabled.
> CPU: Intel Pentium III (Katmai) stepping 03
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> mtrr: v1.36 (20000221) Richard Gooch (rgooch@atnf.csiro.au)
> PCI: PCI BIOS revision 2.10 entry at 0xfb2c0, last bus=1
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> PCI: Using IRQ router VIA [1106/0596] at 00:07.0
> Activating ISA DMA hang workarounds.
> Linux NET4.0 for Linux 2.4
> Based upon Swansea University Computer Society NET3.039
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP
> IP: routing cache hash table of 512 buckets, 4Kbytes
> TCP: Hash tables configured (established 4096 bind 4096)
> Initializing RT netlink socket
> Starting kswapd v1.8
> pty: 256 Unix98 ptys configured
> Uniform Multi-Platform E-IDE driver Revision: 6.31
> ide: Assuming 33MHz system bus speed for PIO modes
> VP_IDE: IDE controller on PCI bus 00 dev 39
> VP_IDE: chipset revision 6
> VP_IDE: not 100% native mode: will probe irqs later
> VT 82C691 Apollo Pro
> Chipset Core ATA-66
> VP_IDE: ATA-66/100 forced bit set (WARNING)!!
> Split FIFO Configuration: 8 Primary buffers, threshold = 1/2
> 8 Second. buffers, threshold = 1/2
> ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
> ide0: VIA Bus-Master (U)DMA Timing Config Success
> ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:pio, hdd:pio
> ide1: VIA Bus-Master (U)DMA Timing Config Success
> hda: IBM-DHEA-36480, ATA DISK drive
> hdb: ATAPI CDROM, ATAPI CDROM drive
> hdc: IBM-DTLA-307045, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: 12692736 sectors (6499 MB) w/476KiB Cache, CHS=790/255/63, UDMA(33)
> hdc: 90069840 sectors (46116 MB) w/1916KiB Cache, CHS=5606/255/63, (U)DMA
> Partition check:
> hda: hda1
> hdc: hdc1 hdc2 hdc3 hdc4 < hdc5 >
> VFS: Mounted root (ext2 filesystem) readonly.
> Freeing unused kernel memory: 188k freed
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> Adding Swap: 136544k swap-space (priority -1)
> Linux Tulip driver version 0.9.10 (September 6, 2000)
> eth0: Macronix 98715 PMAC rev 32 at 0xe800, 00:80:AD:00:DB:BE, IRQ 11.
> isapnp: Scanning for Pnp cards...
> isapnp: Card '33600 bps FAX/Voice Internal Modem '
> isapnp: 1 Plug & Play card detected total
> Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> ttyS01 at 0x02f8 (irq = 3) is a 16550A
> ttyS02 at port 0x03e8 (irq = 5) is a 16550A
> CSLIP: code copyright 1989 Regents of the University of California
> PPP generic driver version 2.4.1
> ip_tables: (c)2000 Netfilter core team
> ip_conntrack (512 buckets, 4096 max)
> PPP BSD Compression module registered
> PPP Deflate Compression module registered
>
>
> /proc/pci:
> PCI devices found:
> Bus 0, device 0, function 0:
> Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev 34).
> Prefetchable 32 bit memory at 0xe0000000 [0xe3ffffff].
> Bus 0, device 1, function 0:
> PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] (rev 0).
> Master Capable. No bursts. Min Gnt=12.
> Bus 0, device 7, function 0:
> ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Mobile South] (rev 9).
> Bus 0, device 7, function 1:
> IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 6).
> Master Capable. Latency=32.
> I/O at 0xe000 [0xe00f].
> Bus 0, device 7, function 3:
> Host bridge: VIA Technologies, Inc. VT82C596 Power Management (rev 0).
> Bus 0, device 8, function 0:
> Ethernet controller: Macronix, Inc. [MXIC] MX987x5 (rev 32).
> IRQ 11.
> Master Capable. Latency=32. Min Gnt=8.Max Lat=56.
> I/O at 0xe800 [0xe8ff].
> Non-prefetchable 32 bit memory at 0xe9000000 [0xe90000ff].
> Bus 0, device 11, function 0:
> Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 6).
> IRQ 10.
> Master Capable. Latency=64. Min Gnt=12.Max Lat=128.
> I/O at 0xec00 [0xec3f].
> Bus 1, device 0, function 0:
> VGA compatible controller: nVidia Corporation Vanta [NV6] (rev 21).
> IRQ 11.
> Master Capable. Latency=32. Min Gnt=5.Max Lat=1.
> Non-prefetchable 32 bit memory at 0xe4000000 [0xe4ffffff].
> Prefetchable 32 bit memory at 0xe6000000 [0xe7ffffff].
>
>
> /proc/ide/via:
> Command register = 0x7
> Master Read Cycle IRDY 1 Wait State
> Master Write Cycle IRDY 1 Wait State
> FIFO Output Data 1/2 Clock Advance: off
> Bus Master IDE Status Register Read Retry: on
> Latency timer = 32 (max. = 0)
> Interrupt Steering Swap: off
> ------------------Primary IDE------------Secondary IDE-----
> both channels togth: yes yes
> Prefetch Buffer : on on
> Post Write Buffer: on on
> FIFO Conf/Chan. : 08 08
> Threshold Prim. : 1/2 1/2
> Read DMA FIFO flush: on on
> End Sect. FIFO flush: on on
> Max DRDY Pulse Width: No limitation
> Bytes Per Sector: 512 512
> --------------drive0------drive1-------drive0------drive1----
> DMA enabled: yes yes yes no
> Act Pls Width: 03 04 11 11
> Recovery Time: 02 02 09 09
> Add. Setup T.: 4T 4T 4T 4T
> ------------------UDMA-Timing-Control------------------------
> Enable Meth.: 1 0 0 0
> Enable: yes no no no
> Transfer Mode: PIO DMA PIO DMA
> Cycle Time: 3T 5T 5T 5T
>
>
>
> Dan Aloni (dax)
> karrde@callisto.yi.org
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> Please read the FAQ at http://www.tux.org/lkml/
>
Andre Hedrick
The Linux ATA/IDE guy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Sep 23 2000 - 21:00:19 EST