>
> Well, I have tried it with 2.4.0-test10, both SMP and non-SMP, and the
> result is a little confusing.
>
> Under SMP a ping -s 50000 -f other_host takes down the network access
> with no messages (ne2k-pci), and no possibility of being restored
> without a reboot.
>
> Under UP the same command works ok, but after a while the dots stop for
> 30sec, then ping prints an 'E' and the dots continue. strace revealed
> this:
Another suggestion - if you have your heart set on using ping
as your network stress tool, you may want to try using multiple
instances of MTU sized pings versus a single "ping -s 50000".
In this way you aren't involving any IP frag code and its associated
bean counting - giving us one less factor to consider.
Oh, and since you get a silent failure, maybe you would be interested
in testing this patch I was (originally) saving for 2.5.x. -- It adds
watchdog transmit timeout functionality to 8390.c (which is used by
the ne2k-pci driver). Last time I updated it was a couple of months
ago, but nothing has changed since then.
Paul.
--- linux~/drivers/net/8390.c Fri Jul 7 03:45:36 2000
+++ linux/drivers/net/8390.c Sat Jul 22 04:56:51 2000
@@ -38,6 +38,7 @@
Paul Gortmaker : add kmod support for auto-loading of the 8390
module by all drivers that require it.
Alan Cox : Spinlocking work, added 'BUG_83C690'
+ Paul Gortmaker : Separate out Tx timeout code from Tx path.
Sources:
The National Semiconductor LAN Databook, and the 3Com 3c503 databook.
@@ -105,6 +106,7 @@
/* Index to functions. */
static void ei_tx_intr(struct net_device *dev);
static void ei_tx_err(struct net_device *dev);
+static void ei_tx_timeout(struct net_device *dev);
static void ei_receive(struct net_device *dev);
static void ei_rx_overrun(struct net_device *dev);
@@ -161,6 +163,13 @@
printk(KERN_EMERG "%s: ei_open passed a non-existent device!\n", dev->name);
return -ENXIO;
}
+
+ /* The card I/O part of the driver (e.g. 3c503) can hook a Tx timeout
+ wrapper that does e.g. media check & then calls ei_tx_timeout. */
+ if (dev->tx_timeout == NULL)
+ dev->tx_timeout = ei_tx_timeout;
+ if (dev->watchdog_timeo <= 0)
+ dev->watchdog_timeo = TX_TIMEOUT;
/*
* Grab the page lock so we own the register set, then call
@@ -200,89 +209,66 @@
}
/**
- * ei_start_xmit - begin packet transmission
- * @skb: packet to be sent
- * @dev: network device to which packet is sent
+ * ei_tx_timeout - handle transmit time out condition
+ * @dev: network device which has apparently fallen asleep
*
- * Sends a packet to an 8390 network device.
+ * Called by kernel when device never acknowledges a transmit has
+ * completed (or failed) - i.e. never posted a Tx related interrupt.
*/
-
-static int ei_start_xmit(struct sk_buff *skb, struct net_device *dev)
+
+void ei_tx_timeout(struct net_device *dev)
{
long e8390_base = dev->base_addr;
struct ei_device *ei_local = (struct ei_device *) dev->priv;
- int length, send_length, output_page;
+ int txsr, isr, tickssofar = jiffies - dev->trans_start;
unsigned long flags;
- /*
- * If it has been too long since the last Tx, we assume the
- * board has died and kick it.
- */
-
- if (netif_queue_stopped(dev)) {
- /* Do timeouts, just like the 8003 driver. */
- int txsr;
- int isr;
- int tickssofar = jiffies - dev->trans_start;
-
- /*
- * Need the page lock. Now see what went wrong. This bit is
- * fast.
- */
-
- spin_lock_irqsave(&ei_local->page_lock, flags);
- txsr = inb(e8390_base+EN0_TSR);
- if (tickssofar < TX_TIMEOUT || (tickssofar < (TX_TIMEOUT+5) && ! (txsr & ENTSR_PTX)))
- {
- spin_unlock_irqrestore(&ei_local->page_lock, flags);
- return 1;
- }
-
- ei_local->stat.tx_errors++;
- isr = inb(e8390_base+EN0_ISR);
- if (!netif_running(dev)) {
- spin_unlock_irqrestore(&ei_local->page_lock, flags);
- printk(KERN_WARNING "%s: xmit on stopped card\n", dev->name);
- return 1;
- }
-
- /*
- * Note that if the Tx posted a TX_ERR interrupt, then the
- * error will have been handled from the interrupt handler
- * and not here. Error statistics are handled there as well.
- */
+ ei_local->stat.tx_errors++;
- printk(KERN_DEBUG "%s: Tx timed out, %s TSR=%#2x, ISR=%#2x, t=%d.\n",
- dev->name, (txsr & ENTSR_ABT) ? "excess collisions." :
- (isr) ? "lost interrupt?" : "cable problem?", txsr, isr, tickssofar);
+ spin_lock_irqsave(&ei_local->page_lock, flags);
+ txsr = inb(e8390_base+EN0_TSR);
+ isr = inb(e8390_base+EN0_ISR);
+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
- if (!isr && !ei_local->stat.tx_packets)
- {
- /* The 8390 probably hasn't gotten on the cable yet. */
- ei_local->interface_num ^= 1; /* Try a different xcvr. */
- }
+ printk(KERN_DEBUG "%s: Tx timed out, %s TSR=%#2x, ISR=%#2x, t=%d.\n",
+ dev->name, (txsr & ENTSR_ABT) ? "excess collisions." :
+ (isr) ? "lost interrupt?" : "cable problem?", txsr, isr, tickssofar);
- /*
- * Play shuffle the locks, a reset on some chips takes a few
- * mS. We very rarely hit this point.
- */
-
- spin_unlock_irqrestore(&ei_local->page_lock, flags);
+ if (!isr && !ei_local->stat.tx_packets)
+ {
+ /* The 8390 probably hasn't gotten on the cable yet. */
+ ei_local->interface_num ^= 1; /* Try a different xcvr. */
+ }
- /* Ugly but a reset can be slow, yet must be protected */
+ /* Ugly but a reset can be slow, yet must be protected */
- disable_irq_nosync(dev->irq);
- spin_lock(&ei_local->page_lock);
+ disable_irq_nosync(dev->irq);
+ spin_lock(&ei_local->page_lock);
- /* Try to restart the card. Perhaps the user has fixed something. */
- ei_reset_8390(dev);
- NS8390_init(dev, 1);
+ /* Try to restart the card. Perhaps the user has fixed something. */
+ ei_reset_8390(dev);
+ NS8390_init(dev, 1);
- spin_unlock(&ei_local->page_lock);
- enable_irq(dev->irq);
- dev->trans_start = jiffies;
- }
+ spin_unlock(&ei_local->page_lock);
+ enable_irq(dev->irq);
+ netif_wake_queue(dev);
+}
+/**
+ * ei_start_xmit - begin packet transmission
+ * @skb: packet to be sent
+ * @dev: network device to which packet is sent
+ *
+ * Sends a packet to an 8390 network device.
+ */
+
+static int ei_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ long e8390_base = dev->base_addr;
+ struct ei_device *ei_local = (struct ei_device *) dev->priv;
+ int length, send_length, output_page;
+ unsigned long flags;
+
length = skb->len;
/* Mask interrupts from the ethercard.
@@ -1147,6 +1133,7 @@
EXPORT_SYMBOL(ei_open);
EXPORT_SYMBOL(ei_close);
EXPORT_SYMBOL(ei_interrupt);
+EXPORT_SYMBOL(ei_tx_timeout);
EXPORT_SYMBOL(ethdev_init);
EXPORT_SYMBOL(NS8390_init);
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Nov 07 2000 - 21:00:18 EST