Greg KH wrote:
> On Wed, Nov 08, 2000 at 08:19:13PM -0800, David Ford wrote:
> > I am going thru the steps atm. The JE driver also hangs.
>
> Thanks for doing this.
np.
> > More information. I have an external USB 4 port hub, in which I have one
> > logitech mouse at the moment. I can cold boot and reboot to my heart's
> > delight fine. But if I unplug/plug in the mouse and reboot, it will hang.
> > Note, I have to unplug and plug back in the mouse to get it recognized by
> > the system before I can use it.
>
> Is the external hub a externally powered hub, or self powered hub (does
> it get it's power from a plug in the wall, or from the USB bus)? Self
> powered hubs are notoriously flaky and have been known to do evil things
> to the USB bus.
Either. Currently bus (self) powered. This hub has worked fine on my other
computers without any adverse affect.
I've stepped through w/ kdb and found some more info. I'm not experience
enough with kdb to provide more details, my apologies.
usb_uhci():2952
start_uhci():2896
pci_write_config_word():
[kdb output trimmed]
pci_write_config_word+0x29: call *%eax
pci_conf1_write_config_word: pushl %ebp
+0x1: movl %esp,%ebp
+0x3: pushl %esi
+0x4: pushl %ebx
+0x5: movl 0x8(%ebp),%edx
+0x8: movl 0xc(%ebp),%ecx
+0xb: movl 0x10(%ebp),%esi
+0xe: movl 0x10(%edx),%eax
+0x11: movzbl 0x3c(%eax),%ebx
+0x15: movl 0x20(%edx),%eax
+0x18: shll $0x10,%ebx
+0x1b: shll $0x8,%eax
+0x1e: movl $0xcf8,%edx
+0x23: orl $0x80000000,%eax
+0x28: orl %eax,%ebx
+0x2a: movl %ecx,%eax
+0x2c: andb $0xfc,%al
+0x2e: orl %eax,%ebx
+0x30: movl %ebx,%eax
+0x32: outl %eax,(%dx)
+0x32: outl %eax,(%dx)
+0x33: movl %ecx,%edx
+0x35: movl %esi,%eax
+0x37: andl $0x2,%edx
+0x3a: orl $0xcfc,%edx
+0x40: outw %ax,(%dx)
And here is where it hangs.
-- "The difference between 'involvement' and 'commitment' is like an eggs-and-ham breakfast: the chicken was 'involved' - the pig was 'committed'."
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Nov 15 2000 - 21:00:13 EST