Summary:
Many audio-cdrom-playing programs don't work correctly with ATAPI
CDROM drives under ide-scsi translation, because ATAPI doesn't support
the PLAYAUDIO_TI command. The ide-cd driver handles this by
transforming CDROMPLAYTRKIND ioctls into something that the ATAPI
drive will understand, but this mechanism is bypassed when using
ide-scsi translation.
This patch creates a new kernel option,
CONFIG_SCSI_IDESCSI_WORKAROUND, that is available whenever ide-scsi
translation is enabled. Enabling this new option includes a
tranlation mechanism into the SCSI CDROM (sr) driver similar to the
mechanism in the ide-cd driver.
Hopefully this will make life much easier for those of us who use
ide-scsi for CDROM drives. It is essentially the same thing as the
patch I posted for 2.2.12 on 19 Oct 1999, but updated for 2.4.0-test9.
This probably isn't the most elegant solution, but maybe it'll help
some people out until Jens figures out something better.
Daniel Risacher
--- linux/Documentation/Configure.help.old Fri Sep 22 20:11:37 2000
+++ linux/Documentation/Configure.help Sat Nov 11 19:02:05 2000
@@ -588,6 +588,20 @@
If unsure, say N.
+IDE-SCSI workaround
+CONFIG_SCSI_IDESCSI_WORKAROUND
+
+ This will enable the SCSI CDROM driver to work around a limitation of
+ the ATAPI specification. The ATAPI spec does not support the
+ play-track-index command, which means that many programs that play
+ audio CD's will not work correctly when using SCSI emulation.
+
+ With this option, the SCSI CDROM driver translates play-track-index
+ commands into play-minute-second-frame commands, in a way similar to
+ the IDE CDROM driver.
+
+ If unsure, say Y.
+
CMD640 chipset bugfix/support
CONFIG_BLK_DEV_CMD640
The CMD-Technologies CMD640 IDE chip is used on many common 486 and
--- linux/drivers/ide/Config.in.old Sat Nov 11 21:35:01 2000
+++ linux/drivers/ide/Config.in Sat Nov 11 19:56:31 2000
@@ -31,6 +31,9 @@
dep_tristate ' Include IDE/ATAPI TAPE support' CONFIG_BLK_DEV_IDETAPE $CONFIG_BLK_DEV_IDE
dep_tristate ' Include IDE/ATAPI FLOPPY support' CONFIG_BLK_DEV_IDEFLOPPY $CONFIG_BLK_DEV_IDE
dep_tristate ' SCSI emulation support' CONFIG_BLK_DEV_IDESCSI $CONFIG_BLK_DEV_IDE $CONFIG_SCSI
+ if [ "$CONFIG_BLK_DEV_IDESCSI" != "n" ]; then
+ bool ' Enable IDE-SCSI workaround in SCSI CDROM driver' CONFIG_SCSI_IDESCSI_WORKAROUND
+ fi
comment 'IDE chipset support/bugfixes'
if [ "$CONFIG_BLK_DEV_IDE" != "n" ]; then
--- linux/drivers/scsi/sr_ioctl.c.old Sat Nov 11 19:48:17 2000
+++ linux/drivers/scsi/sr_ioctl.c Sat Nov 11 21:25:46 2000
@@ -1,3 +1,4 @@
+#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/mm.h>
@@ -30,6 +31,53 @@
/* In fact, it is very slow if it has to spin up first */
#define IOCTL_TIMEOUT 30*HZ
+#ifdef CONFIG_SCSI_IDESCSI_WORKAROUND
+/* ATAPI drives don't have a SCMD_PLAYAUDIO_TI command. When these drives
+ are emulating a SCSI device via the idescsi module, they need to have
+ CDROMPLAYTRKIND commands translated into CDROMPLAYMSF commands for them */
+
+static int
+sr_fake_playtrkind(struct cdrom_device_info *cdi, unsigned int cmd, void* arg)
+{
+ struct cdrom_ti* ti = (struct cdrom_ti*)arg;
+ u_char sr_cmd[10];
+ struct cdrom_tocentry trk0_te, trk1_te;
+ int ntracks;
+ struct cdrom_tochdr tochdr;
+ sr_audio_ioctl(cdi, CDROMREADTOCHDR, &tochdr);
+ ntracks = tochdr.cdth_trk1 - tochdr.cdth_trk0 + 1;
+
+ if (ti->cdti_trk1 == ntracks)
+ ti->cdti_trk1 = CDROM_LEADOUT;
+ else
+ ti->cdti_trk1 ++;
+
+ trk0_te.cdte_track = ti->cdti_trk0;
+ trk0_te.cdte_format = CDROM_MSF;
+ trk1_te.cdte_track = ti->cdti_trk1;
+ trk1_te.cdte_format = CDROM_MSF;
+
+ sr_audio_ioctl(cdi, CDROMREADTOCENTRY, &trk0_te);
+ sr_audio_ioctl(cdi, CDROMREADTOCENTRY, &trk1_te);
+
+ sr_cmd[0] = GPCMD_PLAY_AUDIO_MSF;
+ sr_cmd[3] = trk0_te.cdte_addr.msf.minute;
+ sr_cmd[4] = trk0_te.cdte_addr.msf.second;
+ sr_cmd[5] = trk0_te.cdte_addr.msf.frame;
+ sr_cmd[6] = trk1_te.cdte_addr.msf.minute;
+ sr_cmd[7] = trk1_te.cdte_addr.msf.second;
+ sr_cmd[8] = trk1_te.cdte_addr.msf.frame;
+ printk ("Playing MSF %d %d %d to %d %d %d\n",
+ sr_cmd[3],
+ sr_cmd[4],
+ sr_cmd[5],
+ sr_cmd[6],
+ sr_cmd[7],
+ sr_cmd[8]);
+ return sr_do_ioctl(MINOR(cdi->dev), sr_cmd, NULL, 0, 0, SCSI_DATA_NONE);
+}
+#endif
+
/* We do our own retries because we want to know what the specific
error code is. Normally the UNIT_ATTENTION code will automatically
clear after one error */
@@ -332,6 +380,9 @@
}
case CDROMPLAYTRKIND: {
+#ifdef CONFIG_SCSI_IDESCSI_WORKAROUND
+ result = sr_fake_playtrkind(cdi, cmd, arg);
+#else
struct cdrom_ti* ti = (struct cdrom_ti*)arg;
sr_cmd[0] = GPCMD_PLAYAUDIO_TI;
@@ -342,9 +393,9 @@
sr_cmd[8] = ti->cdti_ind1;
result = sr_do_ioctl(target, sr_cmd, NULL, 255, 0, SCSI_DATA_NONE);
+#endif
break;
}
default:
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Nov 15 2000 - 21:00:21 EST