David Woodhouse wrote:
>
> torvalds@transmeta.com said:
> > If somebody still has a problem with the in-kernel stuff, speak up.
>
> I have an i82092AA evaluation board:
>
> 00:06.0 PCMCIA bridge: Intel Corporation 82092AA_0 (rev 02)
> Flags: slow devsel, IRQ 27
> I/O ports at 8400 [size=4]
>
> I have three problems:
>
> 1. I have to specify the i365_base parameter when loading i82365,o
>
> 2. Even when I specify cs_irq=27, it resorts to polling:
>
> Intel PCIC probe:
> Intel i82365sl DF ISA-to-PCMCIA at port 0x8400 ofs 0x00, 2 sockets
> host opts [0]: none
> host opts [1]: none
> ISA irqs (default) = none! polling interval = 1000 ms
> Intel i82365sl DF ISA-to-PCMCIA at port 0x8400 ofs 0x80, 2 sockets
> host opts [2]: none
> host opts [3]: none
> ISA irqs (default) = none! polling interval = 1000 ms
For these two, it sounds to me like you need to be doing a PCI probe,
and getting the irq and I/O port info from pci_dev. And calling
pci_enable_device, which may or may not be a showstopper here...
Jeff
-- Jeff Garzik | Building 1024 | The chief enemy of creativity is "good" sense MandrakeSoft | -- Picasso - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Nov 23 2000 - 21:00:13 EST