Re: test-10 tulip "eth0 timed out" (smp, heavy IDE use)

From: Lukasz Trabinski (lukasz@lt.wsisiz.edu.pl)
Date: Tue Nov 28 2000 - 04:52:46 EST


In article <20001128042134.A1041@twoey> you wrote:

> Using 2.4-test10 I got a series of timeout errors on my tulip network
> card (Linksys LNE version 4, 00:0d.0 Ethernet controller: Bridgecom,
> Inc: Unknown device 0985 (rev 11)). Networking then completely stopped
> working. Restarting the interface with ifconfig fixed the problem.

> I am using an SMP kernel, compiled with gcc 2.95.2 on an ABit BP6 (dual
> celeron 500s, 128mb, PIIX4 using DMA).

> [log extract]
> Nov 28 04:04:52 twoey kernel: NETDEV WATCHDOG: eth0: transmit timed out
> Nov 28 04:04:52 twoey kernel: eth0: Transmit timed out, status fc664010,
> CSR12 00000000, resetting...

I have the same problem with SMSC EPIC/100 83c170 Ethernet controller:

NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timeout using MII device, Tx status 0003.
eth0: Restarting the EPIC chip, Rx 4568454/4568454 Tx 6262613/6262623.
eth0: epic_restart() done, cmd status 000a, ctl 0512 interrupt 240000.

kernel 2.4.0-test11

-- 
*[ Łukasz Tr±biński ]*
SysAdmin @wsisiz.edu.pl
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Thu Nov 30 2000 - 21:00:19 EST