Hi!
It seems that there is a conflict between my ethernet card and my serial
port.
I'm using RedHat 7.0 and my ethernet card is a "Kingston EtheRx KNE20
Plug and Play ISA Adapter". I'm unable to access the Internet because
the ethernet card doesn't work :-(. Besides, the card uses two
interrupts (?) and there are two interfaces (eth0 y eth1) when I have
only one (?).
The "gpm" program doesn't work if the ethernet card modules is loaded.
When I unload the ethernet card module and restart gpm, my computer
hangs.
I hope next files can help you.
Bye!
-- D. Juan Piernas Cánovas Departamento de Ingeniería y Tecnología de Computadores Facultad de Informática. Universidad de Murcia Campus de Espinardo - 30080 Murcia (SPAIN) Tel.: +34968367657 Fax: +34968364151 email: piernas@ditec.um.es PGP public key: http://pgp.rediris.es:11371/pks/lookup?search=piernas%40ditec.um.es&op=index
CPU0 0: 11683 XT-PIC timer 1: 258 XT-PIC keyboard 2: 0 XT-PIC cascade 5: 1 XT-PIC NE2000 10: 0 XT-PIC es1371 12: 0 XT-PIC NE2000 14: 3047 XT-PIC ide0 15: 6 XT-PIC ide1 NMI: 0 LOC: 0 ERR: 0
0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0213-0213 : isapnp read 0240-025f : eth1 02f8-02ff : serial(auto) 0300-031f : eth0 0376-0376 : ide1 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial(auto) 0a79-0a79 : isapnp write 0cf8-0cff : PCI conf1 e000-e00f : VIA Technologies, Inc. Bus Master IDE e000-e007 : ide0 e008-e00f : ide1 e800-e83f : Ensoniq ES1371 [AudioPCI-97] e800-e83f : es1371
Card 1 'KTC2000:Kingston EtheRx KNE20 Plug and Play ISA Adapter' PnP version 1.0 Product version 1.0 Logical device 0 'RTL8019:Unknown' Supported registers 0x2 Compatible device PNP80d6 Device is active Active port 0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff Active IRQ 255 [0xff],255 [0xff] Active DMA 255,255 Active memory 0xffffffff,0xffffffff,0xffffffff,0xffffffff Resources 0 Priority preferred Port 0x240-0x380, align 0x1f, size 0x20, 10-bit address decoding IRQ 3,4,5,2/9,10,11,12,15 High-Edge
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Nov 30 2000 - 21:00:25 EST