[1.] One line summary of the problem:
PROBLEM: 240t12p3: Reproducable oops involving ping
[2.] Full description of the problem/report:
While teaching myself Perl, I've either demonstrated a compiler error, or
appear to have found a way to make the 2.4.0-test12-pre3 kernel oops
reproducably many times. Perhaps the kernel is just scared of my poor
Perl, but something doesn't like it. I was originally trying to see what a
full arpcache would like like, but then was having fun annoying my
roommates with ping storms when my die got more annoyed.
[3.] Keywords (i.e., modules, networking, kernel):
2.4.0-test12-pre3 oops ping
[4.] Kernel version (from /proc/version):
Linux version 2.4.0-test12-pre3 (root@toy) (gcc version 2.95.2 20000220
(Debian GNU/Linux)) #1 Wed Nov 29 11:53:59 EST 2000
[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)
Note: the oops happens many many times in a row, so much that it fills my
dmesg. This is the first entire oops that I can see, but all the ones
after this look very very similar.
ksymoops 2.3.4 on i586 2.4.0-test12-pre3. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.0-test12-pre3/ (default)
-m /usr/src/linux/System.map (specified)
Unable to handle kernel paging request at virtual address cc012078
c0125ef0
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c0125ef0>]
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010803
eax: 02000018 ebx: c11ffc14 ecx: 44012720 edx: c4012000
esi: 00000246 edi: 00000007 ebp: c1d15d40 esp: c4adff38
ds: 0018 es: 0018 ss: 0018
Process manyping.pl (pid: 478, stackpage=c4adf000)
Stack: c450a000 fffffff4 c21ff620 c01162e6 c11ffc14 00000007 c4ade000
080fa490
00000004 c4adffbc c21ff620 c4adff94 00000000 c4ade000 c4c23920
c21ff62c
fffffff4 fffffff4 00000000 00000000 00000000 c4adffa0 c4adffa0
00000000
Call Trace: [<c01162e6>] [<c010944f>] [<c010aa03>]
Code: 8b 44 82 18 89 42 14 83 f8 ff 75 05 8b 02 89 43 08 56 9d 89
>>EIP; c0125ef0 <kmem_cache_alloc+24/54> <=====
Trace; c01162e6 <do_fork+5be/940>
Trace; c010944f <sys_fork+13/18>
Trace; c010aa03 <system_call+33/40>
Code; c0125ef0 <kmem_cache_alloc+24/54>
00000000 <_EIP>:
Code; c0125ef0 <kmem_cache_alloc+24/54> <=====
0: 8b 44 82 18 mov 0x18(%edx,%eax,4),%eax <=====
Code; c0125ef4 <kmem_cache_alloc+28/54>
4: 89 42 14 mov %eax,0x14(%edx)
Code; c0125ef7 <kmem_cache_alloc+2b/54>
7: 83 f8 ff cmp $0xffffffff,%eax
Code; c0125efa <kmem_cache_alloc+2e/54>
a: 75 05 jne 11 <_EIP+0x11> c0125f01 <kmem_cache_alloc+35/54>
Code; c0125efc <kmem_cache_alloc+30/54>
c: 8b 02 mov (%edx),%eax
Code; c0125efe <kmem_cache_alloc+32/54>
e: 89 43 08 mov %eax,0x8(%ebx)
Code; c0125f01 <kmem_cache_alloc+35/54>
11: 56 push %esi
Code; c0125f02 <kmem_cache_alloc+36/54>
12: 9d popf
Code; c0125f03 <kmem_cache_alloc+37/54>
13: 89 00 mov %eax,(%eax)
[6.] A small shell script or example program which triggers the
problem (if possible)
swapoff -a
cat manyping.pl
#!/usr/bin/perl -w
@ip = (1 .. 255);
foreach (@ip) {
system("ping -c 40 -s 5000 192.168.0.$_ &");
}
I was backgrounding the above program (./manyping.pl &), and running it
with several (15?) instances at the same time.
[7.] Environment
This is an up-to-date Debian Woody system.
[7.1.] Software (add the output of the ver_linux script here)
Linux toy 2.4.0-test12-pre3 #1 Wed Nov 29 11:53:59 EST 2000 i586 unknown
Kernel modules 2.3.21
Gnu C 2.95.2
Gnu Make 3.79.1
Binutils 2.10.1.0.2
Linux C Library > libc.2.2
Dynamic linker ldd (GNU libc) 2.2
Procps 2.0.6
Mount 2.10q
Net-tools 2.05
Console-tools 0.2.3
Sh-utils 2.0i
Modules Loaded rtc es1371 ac97_codec ne 8390
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : AuthenticAMD
cpu family : 5
model : 8
model name : AMD-K6(tm) 3D processor
stepping : 12
cpu MHz : 400.901
cache size : 64 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
features : fpu vme de pse tsc msr mce cx8 pge mmx syscall 3dnow k6_mtrr
bogomips : 799.54
[7.3.] Module information (from /proc/modules):
rtc 5280 0 (autoclean)
es1371 24400 0
ac97_codec 7504 0 [es1371]
ne 6352 1
8390 6064 0 [ne]
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
toy:~# cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0280-029f : eth0
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(set)
0cf8-0cff : PCI conf1
5c20-5c3f : PCI device 10b9:7101
d000-d00f : PCI device 10b9:5229
d400-d4ff : PCI device 121a:0005
d800-d83f : PCI device 1274:1371
d800-d83f : es1371
toy:~# cat /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-06ffffff : System RAM
00100000-002260a7 : Kernel code
002260a8-00239b83 : Kernel data
dc000000-ddffffff : PCI device 121a:0005
e0000000-e3ffffff : PCI device 10b9:1541
e6000000-e7ffffff : PCI device 121a:0005
ffff0000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: Acer Laboratories Inc. [ALi] M1541 (rev 04)
Subsystem: Acer Laboratories Inc. [ALi] ALI M1541 Aladdin V/V+ AGP System Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [b0] AGP version 1.0
Status: RQ=28 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Acer Laboratories Inc. [ALi] M5243 (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000e000-0000dfff
Memory behind bridge: e0000000-dfffffff
Prefetchable memory behind bridge: e8000000-e7ffffff
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
00:03.0 Bridge: Acer Laboratories Inc. [ALi] M7101 PMU
Subsystem: Acer Laboratories Inc. [ALi] ALI M7101 Power Management Controller
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:07.0 ISA bridge: Acer Laboratories Inc. [ALi] M1533 PCI to ISA Bridge [Aladdin IV] (rev c3)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort+ >SERR- <PERR-
Latency: 0
00:09.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 06)
Subsystem: Ensoniq Creative Sound Blaster AudioPCI64V, AudioPCI128
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (3000ns min, 32000ns max)
Interrupt: pin A routed to IRQ 7
Region 0: I/O ports at d800 [size=64]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0+,D1-,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev 01) (prog-if 00 [VGA])
Subsystem: 3Dfx Interactive, Inc. Voodoo3
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Interrupt: pin A routed to IRQ 3
Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=32M]
Region 1: Memory at e6000000 (32-bit, prefetchable) [size=32M]
Region 2: I/O ports at d400 [size=256]
Expansion ROM at 000c0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev c1) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 0
Region 4: I/O ports at d000 [size=16]
[7.6.] SCSI information (from /proc/scsi/scsi)
n/a
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):
This happened originally when I was in X. I rebooted, and was able to
reproduce it on the console before any DRI stuff loaded.
[X.] Other notes, patches, fixes, workarounds:
I am on LK, but please CC replys to me. Thank you!
--
Burton Windle burton@fint.org
Linux: the "grim reaper of innocent orphaned children."
from /usr/src/linux/init/main.c:1384
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Dec 07 2000 - 21:00:08 EST